13.6 Live Input Video, Fill & Key Output Signal (v.5.x)

You must unlock the Just Control Configuration window and stop the channel(s) first to perform any changes.

A Channel can “pass-thru” a live signal attached to its video device. The output signal can also include Key signal information. The functionality may differ, depending on the used video device. Please refer to the dedicated Chapter https://toolsonair.atlassian.net/wiki/spaces/TST/pages/3580594014 for more information regarding this.

  1. Stop the desired Channel by deactivating the checkbox in front of it. Stopping a Channel will also stop the Just Out engine and therefore the final output.

  2. Select the Channel in the “Devices & Channels” list.

  3. Click on the “Format” tab.

  4. Select the desired method in the “Live Input & Fill+Key” drop-down menu. The methods are explained below.

  5. Activate the checkbox in front of the Channel to start it again and to take over the changes you just made.

  6. Close the Just Control Configuration panel and drag the Channel from the “Connections” tab to the Multi viewer area.
    video-only

Live Input & Fill+Key Methods

  • No in, video out: Select this setting for a simple video only playout server with no incoming signal attached. The default output is black.

  • No in, video+key out: Select this setting in case the two SDI outputs on the video device should provide one video and one key signal, with no incoming signal attached. The default output is black.

  • DSK in, video out (default black): Select this setting in case there is a signal attached to the “SDI 1” input of the AJA device video device, that you would like to “pass-thru” to the available outputs while a live event is scheduled. The default output is black.

  • DSK in, video out (default pass-thru): Select this setting in case there is a signal attached to the “SDI 1” input of the AJA device video device, that you would like to “pass-thru” to the available outputs while a live event is scheduled. The default output is the signal which is attached to the “SDI 1” input.

  • DSK in, video+key out (default black): Select this setting in case there is a signal attached to the “SDI 1” input of the AJA device video device, that you would like to “pass-thru” to the available outputs while a live event is scheduled. The two SDI outputs of the AJA video device will provide one video and one key signal. The default output is black.

  • DSK in, video+key out (default pass-thru): Select this setting in case there is a signal attached to the “SDI 1” input of the AJA device video device, which you would like to “pass-thru” to the available outputs while a live event is scheduled. The two SDI outputs of the AJA video device will provide one video and one key signal. The default output is the signal which is attached to the “SDI 1” input.

  • Buffered in, video+key out (default black): Select this setting in case there is a signal attached to the SDI input of the video device, that you would like to “pass-thru” to the available outputs while a live event is scheduled. The two SDI outputs of the video device will provide one video and one key signal. The default output is black.

  • Buffered in, video+key out (pass-thru): Select this setting in case there is a signal attached to the SDI input of the video device, which you would like to “pass-thru” to the available outputs while a live event is scheduled. The two SDI outputs of the video device will provide one video and one key signal. The default output is the signal which is attached to the SDI input.

→ Use the sidebar to navigate.