2.9 Notes About UHD Playout (v2.0)

With version 2.0 we started to support UHD playout up to and including 30 fps using selected hardware. Here are some additional informations which should be considered while configuring a server for UHD playout.

• UHD playout is only supported with a MacPro6,1.
• Only those video devices which have been qualified by ToolsOnAir should be used (see chapter → Supported Video Devices).
• Make sure all cables, boxes and devices are using Thunderbolt 2 with 20 Gbit or higher.
• The faster the MacPro, the more functions can be used at the same time and a higher video codec quality can be used.
• We recommend to use Apple ProRes (up to and including 422 HQ) and selected H.264 compressed movies.
• Although it is possible to run just:out and the UI on the same machine, we strongly recommend running the UI on a separate machine.
• Real-time graphics are supported but especially complex templates must be tested thoroughly before using them on air.
• While it is possible to use the internal streaming engine, we recommend to use an external streaming device to avoid an overloaded hardware.
• We recommend to disable the Low latency playout in the advanced channel settings of just:connect.
• Currently it is not possible to use an internal method to switch to live. An external mixer has to be used instead.
• The output of Closed Captions is not supported at the moment.