When an error or problem occurs just:in will inform you about that by displaying a message in the corresponding Channel Viewer(s).

Types of Warning Messages

• Red Warnings: inform about a severe problem which must be fixed in order to continue.
• Yellow Warnings: inform about an issue which should be fixed, but you may dismiss the warning.
  
  

Lost Channel Connection

• Can be related to a network connectivity problem.
• Verify the connection between just:in and just:in Engine.
• As soon as the connection to the Channel can be re-established this message disappears automatically.

Signal Loss

• The Video Signal has been lost and the current Recording will stop in order to safeguard the already recorded clip.
• Once the Signal is back just:in restarts the Recording.
• You can optionally choose to continue writing into the same container by enabling this option in the just:in Engine Preferences.
• We strongly recommend using a frame store on every Channel input in order to prevent signal loss.

Preset Issues (XDCAM, DNxHD and H.264)

• When there is a problem with a Preset a warning will be displayed.
• You can dismiss the error message and fix the issue.

Recording Destination not Available

• A volume or folder which has been defined in the selected Destination Preset could not be found.
• Double check your Destination Preset(s).

Too much Load on Engine

• The resolution and/or framerate of the Channel Preview may be too high.
• Verify the Preview Options of the particular Channel in the Preferences of just:in Engine.
• Use a dedicated machine for just:in Engine. Make sure the machine and network specs are sufficient.