Table of Contents

live:cut Projects

Creating a live:cut Project

1. Open just:in and select the desired Channels for your live:cut Project and open the Inspector. You need to select at least two Channels.
   
   
   
2. Select a Timecode Source, a Capture- and Destination-Preset. It is mandatory that these attributes are synchronized for all Channels used with live:cut.
   
   
   
3. Go to the menu Channel → New live:cut Project.
   
   
   
4. Enter a Name, Scene and Take for the live:cut Project. Project Template is not required at this time. Press the Create button when you are done.
   
   
   
5. If everything went okay the live:cut Interface will be shown.
   

Closing a live:cut Project

1. Go to the menu Project → Close Project.
2. The live:cut Project will be closed immediately and the just:in User Interface appears again.
   

Opening a saved live:cut Project

1. Open the folder ~/Documents/LiveCut Documents/Projects and double click the Project file you want to open.
   
   
   
2. live:cut opens the Project and displays an already filled EDL. You may export the Project again by using the menu Project → Export to …
   
   

Exporting a live:cut Project

You may reopen live:cut Projects at any time after the end of your recording session and re-export the Project with a different settings – if you wish.

1. Make sure you are in a live:cut Project. To open a previously saved live:cut Project refer to the instructions above.
2. If desired change the Project/Export settings.

3. Use the menu Project → Export to …
   
   
   

   Normally the export happens automatically after each recording session.

live:cut Project Templates

Creating a live:cut Project Template

1. Make sure your are in a live:cut Project. To open a previously saved live:cut Project refer to the instructions above.
2. Go to the menu Project → Create Template.
   
   
   
3. Enter a Template name and press the Save button.
   

Using a live:cut Project Template

1. Go to the menu Channel → New live:cut Project.
   
   
   
2. Select your Project Template from the drop-down menu.
   

Removing a live:cut Project Template

1. Make sure that live:cut is currently not using the Project Template you want to delete.
2. In the Finder go to your User folder.
3. Open the folder ~/Documents/LiveCut Documents/Project Templates.
4. Delete the desired Project Template.

Starting a Multicam Recording

Before starting a Multicam Recording you must ensure that your live:cut Project Settings are configured properly. Refer to the chapter Project Settings.

If you have already configured the Project Settings you can head straight to the chapter Starting a Multicam Recording.