/
just:in 4.0 Release Notes

just:in 4.0 Release Notes

Sept 26, 2021

Just In 4.0.2.GM.956 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to use AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • The warnings alert shown when quitting just:control (e.g. when channels are in schedule mode) now has an addition "Do not show again" option to hide the warnings in the future. Additionally the warning are not shown when just:control is quit during a system restart or logout.

 

Just In 4.0.2.GM.955 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug where very long mxf files may suffered from write errors due to a buffer overflow.

 

Just In 4.0.2.GM.954 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug where channels weren't restarting under certain circumstances.

  • Fixed a bug that would cause System Preferences to crash when opening TOA Preferences on macOS Catalina.

 

Just In 4.0.2.GM.953 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed issues that sometimes caused channels not to reconnect after restarting just:in linux.

 

Just In 4.0.2.GM.952 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed issues that sometimes caused channels not to reconnect after restarting just:in mac or just:in linux.

  • When recording scheduled events, the "%Date" and "%Time" tokens are now replaced using the "Full" date and time settings specified in System Preferences ("Language and Region" > "Advanced..." and then "Dates" and "Times"). You can alter the formatting used in System Preferences.

 

Just In 4.0.2.GM.951 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Stability and bug fixes related to recording live:cut projects.

  • Resolved a bug that sometimes caused just:in channels to fail to connect after stopping and starting a channel in the configuration panel.

  • Resolved a bug that sometimes caused just:in channels to fail to connect after quitting and restarting just:in mac or just:in linux.

 

Just In 4.0.2.GM.950 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug updating the fields in the inspector after selecting a different naming preset.

  • Resolved an issue connecting multiple just:control clients to a just:in linux channel.

  • Updated just:in mac to the latest AJA drivers and enabled high-frame-rate UHD capture (p50 and p60).

 

Just In 4.0.2.GM.949 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Performance and stability improvements

 

Just In 4.0.2.GM.948 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved a bug that resulted in the chunk duration always being set to 2 hours for just:in mac channels regardless of the value entered in just:control.

 

Just In 4.0.2.GM.947 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved a bug that sometimes resulted in MOV files missing the final few seconds after stopping a recording.

  • Fixed a performance issue recording with "trial mode" (without a license key), particularly with 10-bit SDI input modes.

 

Just In 4.0.2.GM.946 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved a bug that caused Adobe Premiere to show recorded MOV files with a 5 seconds duration.

 

Just In 4.0.2.GM.945 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved a crash using Blackmagic input cards under high CPU load.

 

Just In 4.0.2.GM.944 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug calculating the maximum RAM available for UHD channels.

 

Just In 4.0.2.GM.943 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Raised the maximum memory limit of a just:in mac channel to 16GB when recording UHD/4K or 4GB in all other cases.

  • The errors shown in a channel's inspector are now only cleared when starting a new recording in "crash" recording mode. In "scheduled" and "batch" recording modes, errors must now be cleared manually by clicking the "Clear All" button in the inspector. This is to prevent errors being "lost" during unattended operation.

  • Improved CPU load performance during recording eliminates CPU throttling / thermal issues on certain systems, in particular the Mac Mini.

 

Just In 4.0.2.GM.942 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed memory corruption resulting in corrupt frames being recorded under high CPU loads in combination with an AJA capture card.

  • Fixed single channel EtoE mode for AJA cards.

 

Just In 4.0.2.GM.941 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • It is no longer possible to start a recording if an encoder is not correctly configured (no capture or destination preset selected).

  • Correctly display a channel's IP:port in the multi-viewer when selected.

  • Fixed a bug that prevented using the tab key to move between fields in the "Clip" inspector group.

  • The "Errors" inspector group has been renamed to "Errors and Warnings".

  • Added a "Cancel" button when creating a new live:cut project.

  • Resolved an issue that sometimes resulted in clicking the record button on a viewer leading to the viewer being "dragged".

 

Just In 4.0.2.GM.940 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug where losing the signal while recording using an AJA card would result in an incorrect timecode upon reconnection. That has been fixed.

 

Just In 4.0.2.GM.939 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • The input mode "SDI (AJA 4K-2SI)" is now enabled when configuring just:in linux channels.

  • When a just:in linux channel starts recording, errors are now cleared on all just:control interfaces connected to the channel, not just the interface that was used to initiate the recording.

  • Resolved an issue with code signing that resulted in just:control and just:in engine not starting without warnings from mac OS's "Gatekeeper" security system.

 

Just In 4.0.2.GM.938 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved an issue creating new H.264 capture presets for just:in linux channels where the codec configuration panel did not close when clicking the "Ok" button.

  • The "tab" key can now be used to navigate through the input fields in the multi-viewer inspector.

  • The Applications are now correctly code-signed.

 

Just In 4.0.2.GM.937 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that could cause corrupt recordings (frame tearing) under certain conditions.

 

Just In 4.0.1.GM.936 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Enabled additional menu item in the "System" device configuration tab when working with just:in linux devices

  • Fixed a bug that resulted in the first capture preset in the configuration panel not correctly displaying an invalid frame-rate.

  • When first connecting a new channel that has no signal, the viewer is now correctly configured.

  • Resolved a bug that could cause capture presets to be unexpectedly updated with different frame-rates and/or resolution when changing devices in the configuration panel.

  • Changing an existing capture preset to UHD now correctly updates the preset.

  • After a channel is restarted, the channel's name in the viewer no longer disappears.

  • When using the group start recording button below the inspector, any channels in scheduled mode no longer start recording. 

 

Just In 4.0.0.GM.935 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Split recording is working on multiple channels again.

  • Audio Sampling rate is set to 24 as default option now.

  • Improved Memory Management.

  • Adjusted color space values to correct values.

 

Just In 4.0.0.GM.934 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a Memory Leak.

  • Fixed a bug, where the signal got corrupted after a signal with multiple AJA channels.

  • Adjusted application signing.

 

Just In 4.0.0.GM.933 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Updated BMD SDK to v11.3.

  • Improved Memory Management.

 

Just In 4.0.0.GM.932 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Adjust copy protection mechanism.

 

Just In 4.0.0.GM.931 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug where "empty" (not connected) viewers were displayed incorrectly.

  • Fixed a bug where using the record menu item (or its keyboard shortcut) would start a channel recording even if it was in scheduled recording mode.

  • The "schedule", "batch, "error" and "audio monitor" inspector groups are now hidden when two or more channels are selected as these are only available for a single channel.

 

Just In 4.0.0.GM.930 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • The channel viewers are now more consistent in terms of the elements displayed (timecode, audio bars, buttons) when the channel has no signal or isn't connected depending on whether the channel previously had a signal or was connected, or just:control was started with a disconnected channel or a channel without a signal.

  • Fixed a bug that meant scheduled events were not shown in just:control or sent to the engine.

 

Just In 4.0.0.GM.929 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • just:in mac's "diagnostics window" is now always shown using the "Dark" mode, even if the system is set to "Light" mode.

  • Fixed a bug that resulted in repeated scheduled events only being recorded once.

  • Resolved an issue that could result in just:control not reconnecting to just:in linux channels after a restart of the system.

 

Just In 4.0.0.GM.928 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that causes unexpected behaviour after changing a channel's calendar.

  • In the "System" tab, just:in mac devices now have channel logs for the past 3 days.

 

Just In 4.0.0.GM.927 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • When activating a just:in mac device, the activation status is correctly updated in the configuration panel.

  • Fixed a bug when configuring a just:in linux device using "AJA (HDMI)" input.

 

Just In 4.0.0.GM.926 Release Notes

 

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Removed legacy "Additional Contents" from the DMG.

  • The currently selected tab in the configuration panel is now remembered and restored depending on the selected item (e.g. device or channel).

  • Updated the warning displayed when quitting just:control with one or more channels in scheduled recording mode.

  • The version of the selected device is now displayed in the device configuration tab.

  • Saving system profiles is now possible for just:in mac devices via the configuration panel.

  • Fixed issues and bugs related to UHD/4K and HDMI input with just:in mac.

  • The "Activation" tab now properly displays the expiry date if the license has one.

  • When connecting to a just:in mac device, the IP address entered for the device is now used for all channel connections instead of the "best" interface available on the system running just:in mac. This prevents, for example, a WLAN interface being used instead of an ethernet interface.

  • The "continue writing on signal loss" action has been discontinued and removed, any channels using this settings now use the "new recording" option.

  • The preferences panel has been removed from just:in mac and the "fallback frame count" option has been moved to the "Device" configuration tab in just:control.

  • When setting up a just:in linux device in just:control there is a new "HDMI (AJA)" option when using a Kona HDMI card.

  • Fixed a bug that resulted in a task's script not being saved.

  • Included an updated example metadata set when setting up a new ingest device.

  • Resolved a layout issue when a channel received errors while the "Errors" group in the inspector was closed.

  • When a device was stopped and restarted, scheduled events were not be sent to any channels in schedule mode after reconnecting. This has been fixed.

  • If a channel's toolbar has been switched to display the channel's host:ip, filename or timecode and the channel is disconnected, the toolbar is automatically reset to the channel's name.

  • Removed all 1080p "B" modes for AJA input devices on just:in mac as these modes are no longer supported.

  • After connecting a new just:in mac device the channel activation checkboxes are now correctly disabled for any channels that are currently recording.

  • It is now possible to create capture presets for just:in linux that write H.264/AAC to an MPEG-TS (transport stream) container.

 

Just In 4.0.0.B1.925 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Fixed a bug that resulted in just:in mac not reporting any channels when using a Blackmagic input card.

  • Added an error in just:in multi after connecting to a device that reports no channels instead of showing the configuration wizard.

  • Resolved an issue in just:in mac that resulted in the application hanging and requiring a "Force Quit" after deactivating a channel.

  • Updated the copyright year to 2019.

 

Just In 4.0.0.B1.924 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Internal test release.

 

Just In 4.0.0.B1.923 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Added AJA SDK 15.2 for more compatible AJA cards.

  • Fixed a bug where enabling multiple AJA channels did result in a stuck channel.

  • Fixed a bug where closed captions weren't detected properly.

 

Just In 4.0.0.B1.922 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Fixed several bugs related to channel settings (both just:in mac and just:linux) where settings were not properly saved and/or corrupted.

  • When activating or deactivating a channel in the configuration panel the channel is now also selected if not currently selected.

  • When a new Blackmagic input card is used for the first time the default channel names now have an index in addition to the name of the card.

  • Resolved a bug in just:in mac where the diagnostics display sometimes displayed incorrect or unexpected values.

 

Just In 4.0.0.B1.921 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Special tags in a schedule event's title such as <Channel>, <Date> and <Time> are now properly replaced for events scheduled on a just:in linux channel.

  • When adding a new device to the configuration panel the port is now set to the default value of 5000.

  • Fixed a bug that resulted in the inspector groups being fixed to the bottom of the view instead of the top.

  • When configuring a device for the first time the device's name is now properly updated in the device table.

  • Resolved a bug that meant that the changing a channel's name had no effect.

  • Fixed a bug using AJA input devices with just:in mac and embedded SDI timecode with framerates above 30fps (e.g. p50, p60).

  • Fixed a memory leak in just:in mac.

  • When changing the selected channel in the configuration panel, any changes to the previously selected channel are now saved assuming the channel is currently updatable.

 

Just In 4.0.0.B1.920 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • When connecting just:in multi to a device with channels that cannot be matched to a local Calendar, but an existing Calendar matches the channel's name, then the existing Calendar is assigned to the channel instead of creating a new local Calendar.

  • It is no longer to disable (stop) a just:in mac channel that is currently recording.

  • There is a new license option for recording UHD/4K content.

  • The configuration panel has been reworked slightly. Now the top half of the window shows a table of devices and channels (a device can be expanded to show its channels). Selecting a device shows options for the device in the bottom half of the window (e.g. Capture Presets, Destination Presets). Selecting a channel shows options for the channel.

 

Just In 4.0.0.B1.919 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • When setting up a just:in linux device, there are now three additional options for AJA input cards: "AJA - 4x 4K-Quad", "AJA - 4K-2SI" and "AJA - 12G". These are relevant when you are intending to capure UHD or 4K, depending on the model of card in use.

  • With this build just:in linux channels also support scheduled recording mode by connecting to a Calendar on the system running just:in multi.

  • When a new calendar is selected for a channel in the configuration panel, the scheduled events are correctly updated when the channel is restarted.

  • The "stop on timecode" controls in the Inspector are now correctly hidden for all recording modes other than crash recording.

  • Fixed a bug using just:in mac channels after adding a new capture preset, removing it and then adding again. Now the selection for the capture and destination presets are correctly empty after adding for a second time, and you must configure them before recording.

 

Just In 4.0.0.B1.918 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • In previous version just:in mac (i.e. the "Engine") created and connected to a local calendar for scheduled recording. From this version onwards, just:in multi (i.e. the "User Interface") now creates and connects to a local calendar. This means that to edit scheduled events, you should open Apple's Calendar app on the system running the just:in multi. Further, the calendar is only monitored for changes while just:in multi is running, so a warning has been added when quitting if one or more channels are in scheduled recording mode. It is recommended that you leave just:in multi running whenever you are using scheduled recording. This change means that scheduled recording will also be supported for just:in linux channels in the near future.

  • Fixed an issue that could cause recordings using AVFoundation on network attached storage to stop recording after a short period of time.

  • If the input device (AJA or Blackmagic) drops frames using just:in mac, errors are now logged in just:in multi.

  • Fixed a bug resulting in incorrect timecodes using embedded timecode with frame-rates higher than 30fps.

  • Capture presets recording to MP4 containers now record according to the MP4 specification, meaning that timecode can no longer be recorded. If you require timecode, please use an AVFoundation (MOV) capture preset.

  • Added an additional setting to metadata presets allowing the file extension to be specified, for example "json" if the metadata export writes JSON instead of XML. For this reason, "XML" destination paths have also been renamed to "Metadata" paths.

  • Resolved an issue where removing a capture preset from a channel resulted in unexpected behaviour.

  • Starting "quicklook" for a single channel now correctly sorts the channels according to their order in the "Connections" tab. This means that if you select the third channel of four in quicklook the third of the four channel "dots" will be selected.

  • Added space between the "fixed" metadata controls in Inspector (the metadata preset and "write at..." selection) and the "dynamic" controls (those associated with the selected metadata preset).

  • Added three new metadata types: date, time and date/time. These types have standard date and/or time entry controls in Inspector. Additionally, the date entry controls can be expanded into the larger "graphical" date picker for easy selection of dates.

  • When recording the metadata controls are now correctly disabled under certain circumstances. The "write at..." selection cannot be changed once recording, and if metadata is written at the start then all other controls are also disabled during recording.

  • Removed legacy capture preset codecs for just:in mac, those only supported by legacy 32-bit QuickTime that Apple have now formally deprecated.

  • Fixed a display error for channels that were disconnected while displaying errors.

 

Just In 4.0.0.B1.917 Release Notes

 

  • This is a 4.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0 or 3.5 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:in multi App). To configure an engine, start just:in multi and select "Manage Channels" from the "Channel" menu.

  • Fixed a bug on "clean systems" where just:in mac wasn't previously installed that lead to the Schedule Mode failing. Specifically, the user was never prompted to allow just:in mac access to Calendars. Now when running just:in mac for the first time on a "clean" system, you will be prompted to grant access to Calendars.

  • In the case that just:in mac isn't able to access Calendars, a warning is now displayed to the effect that Schedule Mode will not work.

  • Fixed an issue that sometimes resulted in multiple calendars being created for the same channel (i.e. calendars with the same name).

  • Fixed a bug that sometimes lead to the "status" window in just:in mac (displaying the active channels and memory usage) remaining empty although one or more channels were active and running.

→ Use the sidebar to navigate.