Table of Contents

Preface

You can monitor and administrate just:store with a web browser. By default just:store is configured for direct connections using the IP address 172.16.x.10. You need the exact IP address to connect to the web administration interface.

Accessing the System Settings

1. Open a web browser. We suggest using Firefox, Safari, Edge or Chrome. Internet Explorer can cause style and function issues. 
2. Enter the IP address or hostname of the just:store system you want to connect to into the address bar of your web browser.
3. Press the enter key.
4. Select Administration on the main page.
   
   
   

5. Enter your login credentials and press the Login button.
   

   DEFAULT LOGIN

   Username = juststore

   Password = juststore

6. In the upper bar click on System.
   
   
   
7. To show or hide a section click on the respective arrow icons.
   

Download System Logs

In a support case you may download the system logs and send them to us for further assistance. Press the Generate Logs button to download the logs.

System Notifications (Email Notifications)

1. Decide whether you want to use ToolsOnAir's mail server or a custom mail server – which is recommended.
2. Enter the mail address of the Recipient.
3. Enter the SMTP Server Address.
4. Enter the SMTP User (if you use a custom mail server).
5. Enter the SMTP Password (if you use a custom mail server).
6. Enter the SMTP Security (if you use a custom mail server).
7. Enter the SMTP Sender (if you use a custom mail server).
8. Press the Save & Test button.

Power

This section allows you to reboot or shutdown the just:store system. Keep in mind that all connections will be lost when doing so.

Silence Alarm

The RAID controller sounds an audible alarm when there are issues. You may silence the RAID controller alarm.