Table of Contents

Number of usable Channels

The number of Channels you can use depends on the Linux server (= hardware). By default just:in Linux v1.0 supports these hardware configurations:

• 4xHD or 1x4k/UHD (up to p60) - JIL4
• 8xHD or 2x4k/UHD (up to p60) - JIL8

Configuring the Linux Hardware

All Linux related settings like network configuration and storage settings should be done by a certified ToolsOnAir partner. After that, it is not required to change any just:in related settings on the Linux server, as every setting can be done via the just:connect User Interface.

Expansion PCIe Cards

just:in Linux is shipped as a server appliance and comes with a video card already integrated. It is also possible to add another PCIe card to the second slot, like a fibre channel card to connect different storage systems to the Linux appliance.

Internal RAID

The system is shipped with an internal RAID (RAID 10). This RAID is available at /media/internal_raid/ingest and is shared via SMB by default (justin:justin).

Installation User Interface

The just:in User Interface can be downloaded from our support system or you can connect via SMB (justin:justin) to the Linux system and mount the share point /media/internal_raid/tools. Afterwards you can copy the just:in User Interface from there.