/
Supported Video Devices (4.0)

Supported Video Devices (4.0)

Mar 24, 2020

Supported Capturing Devices

We recommend to provide a continuously stable signal during your capture processes, otherwise the ingest process may be interrupted and the captured files may not be usable. In order to stabilize the signal in advance (= before it is sent to the Video card input) please use a Audio/Video Frame Synchronizer.

This chapter contains a list of supported video devices to record in SD, HD or UHD. When using a Thunderbolt device from AJA or Blackmagic Design, please make sure that the speed of the Thunderbolt bus is 20 Gbit/s (i.e. Thunderbolt 2) or higher (i.e. Thunderbolt 3). This is especially important when recording in UHD.

 

AJA

Blackmagic Design

 

AJA

Blackmagic Design

PCIe Cards

  • KONA 5 (8K firmware required)

  • KONA 4

  • KONA HDMI

  • KONA IP

  • KONA LHi

  • KONA 1

  • KONA LHe Plus

  • Corvid 88

  • Corvid 44 12G (BNC) (8K firmware required)

  • Corvid 44 (BNC)

  • Corvid 22

  • Corvid 24

  • DeckLink Quad HDMI Recorder

  • DeckLink 8K Pro

  • DeckLink 4K Extreme 12G

  • DeckLink Studio 4K

  • DeckLink SDI 4K

  • DeckLink Quad 2

  • DeckLink Duo 2

  • DeckLink Duo 2 Mini

  • DeckLink Mini Recorder 4K

  • DeckLink Mini Recorder

Thunderbolt Devices

  • Io 4K Plus

  • Io IP

  • Io 4K

  • Io XT

  • UltraStudio 4K Extreme 3

  • UltraStudio 4K

  • UltraStudio HD Mini

  • UltraStudio Mini Recorder

Notes

  • Driver Version: 15.5.1 or later.

  • Looping the incoming Source: With the Io4K you may use the UFC Firmware Mode to make the engine loop the incoming source to any output for monitoring purposes.

  • Driver Version: 11.4.1 or later.

  • DeckLink Duo Hardware: We do not recommend DeckLink Duo cards for >2 Channel ingest due to thermic problems and reported frame loss issues. Please use the DeckLink Quad  2 card or the DeckLink Duo 2 instead.

→ Use the sidebar to navigate.