[JIM] Release Notes v.2025.1
- Christian Schabasser
- Manuel Grund
2025.1.0.GM.1288 - RELEASE
Improvements related to licensing.
2025.1.0.GM.1287
Fixed an issue on macOS 15 Sequoia that meant it was not possible to lock the multi-viewer inspector using the “option” key with the mouse over the inspector’s close button.
2025.1.0.GM.1286
If scheduled events are scheduled more than 24 hours in the future, and the calendar isn’t changed at all within the next 24 hours, the events are now correctly added to the channel’s schedule.
If a channel has been added to more than one group, removing the channel from one group no longer removes it from all groups, only from the group to which the selected item in the inspector belongs.
2025.1.0.GM.1285
Improvements around license updating and trial licenses.
2025.1.0.GM.1284
By default, each channel running will stop recording if the memory consumed reaches a pre-defined upper limit to guard against system RAM being exhausted. However, under certain circumstances it might be necessary to raise or even disable this upper limit.
2025.1.0.GM.1283
REST API extensions reflecting status reports.
Channel Viewer UI improvements.
Error Display UI improvements.
Support for 16 audio channels for SRT and UDP.
Improved support for ARD/ZDF MXF Profiles (HDF01/XDF-01).
Support for macOS Sequoia with new Blackmagic Driver generation (v.14.3 and higher).
When recording with a SD DVCPRO capture preset to a MOV container, the recorded file has the correct aspect ratios as defined by the preset.
When creating a new capture preset, the “TV Norm” dropdown menu now only specifies the options actually supported by the device being configured.
Added a “start timecode” checkbox and timecode field to the channel configuration tabs when configuring just:in Linux channels, allowing you to specify an alternative timecode that any recorded files should specify as the first timecode. If not selected, the frame’s timecode based on the selected timecode source will be used as the file’s first timecode.
When a device or channel is selected in the configuration panel, the window’s title now shows the name of the selected device (if a channel is selected, the name of the device to which the channel belongs), and, optionally, the currently selected configuration preset if the device has configuration presets defined.
2025.1.0.GM.1282
Fixed a crash when logging into Just Control.
Fixed a bug that caused some capture presets to fail at the start of recording.
2025.1.0.GM.1281
When recording with a SD DVCPRO capture preset to a MOV container, the recorded file has the correct aspect ratios as defined by the preset.
When creating a new capture preset, the “TV Norm” dropdown menu now only specifies the options actually supported by the device being configured.
Added a “start timecode” checkbox and timecode field to the channel configuration tabs when configuring just:in Linux channels, allowing you to specify an alternative timecode that any recorded files should specify as the first timecode. If not selected, the frame’s timecode based on the selected timecode source will be used as the file’s first timecode.
When a device or channel is selected in the configuration panel, the window’s title now shows the name of the selected device (if a channel is selected, the name of the device to which the channel belongs), and, optionally, the currently selected configuration preset if the device has configuration presets defined.
2025.1.0.GM.1280
When creating SD DVCPRO capture presets, both 4:3 and 16:9 aspect ratios may be selected.
2025.1.0.GM.1279
Refactored DVCPRO SD codecs including DVCPRO50 when creating new capture presets. These codecs can be written to both MOV and MXF containers.
DVCPROHD codecs may now be written to MOV as well as MXF containers.
When controlling a just:in Linux channel that is configured to continue recording black or duplicate frames when the signal is lost, it is now possible to stop recording even while the signal is lost.
2025.1.0.GM.1278
Fixed a deadlock using the REST API in combination with stopping or starting channels that resulted in the API ceasing to respond to requests.
2025.1.0.GM.1277
Fixed a potential memory leak recording to MXF with a signal that only occasionally contains VANC packets.
2025.1.0.GM.1276
The live:cut project settings panel now has two additional settings for “Fade To Next In” and the number of frames to fade, allowing a live:cut template to be created with specific defaults for these settings.
2025.1.0.GM.1275
Updated NDI to v6.1.1 for improved stability and performance.
The “short version” of the Apps shown in Finder now show the correct version in the format “2025.x.y”.
2025.1.0.GM.1274
This release requires a new 2025 license code. If you have a valid license for an older release (v6.5 or earlier), please contact ToolsOnAir for a new license key before installing as otherwise the software will revert to “demo” mode with a watermark. Note that activation now requires the system running Just In Engine to have a live internet connection.
New seamless Online Activation process, hence new version number 2025.
NDI VANC metadata is now conforming to the ToolsOnAir specification as agreed with NDI.
Updated Blackmagic drivers to release 14.3. If you are using Blackmagic devices, please update your system to this release.New seamless Online Activation process, hence new version number 2025.
REST API extensions reflecting status reports.