[JIL] Channel Ordering v.6.1

The channel ordering in live:cut depends on which channels were selected for the live:cut Project in the first place. For instance, when you have four channels selected in Just Control, then you will have four channels in your live:cut project. Channel ordering goes from top left to bottom right, as can be seen in following screenshot.

Open

Open

In case you have four channels connected inJust Control and you are only using two channels (in this case, Channel1 and Channel4) for live:cut, then the channel ordering changes accordingly. Please see screenshots below (Channel2 and Channel4 are connected but not active in live:cut mode).

If you are working with a different set of channels for different scenes and you want that “CAM4” always stays as “CH4” in live:cut, then you can do that with different live:cut Templates and channel mappings. That means that you will have to create a live:cut Template for each scene. So you will have a live:cut Project for a three camera scene, a five camera scene and so on.