[JIL] Work with live:cut Projects v.6.1
- Christian Schabasser
All of the following chapters require that you are running a properly configured just:in linux setup. If this is not the case, please refer to the related just:in solution documentation.
live:cut Projects
Create a live:cut Project
Open Just Control and select the desired Channels for your live:cut Project and open the Inspector. You need to select at least two Channels. Select a Timecode Source and a Capture- and Destination-Preset. It is mandatory that these attributes are synchronized for all Channels used with live:cut.
Go to the menu “Channel → New live:cut Project”. Enter a “Name”, “Scene” and “Take” value for the live:cut Project. A Project Template is not required at this time. Press the “Create” button when you are done.
If everything went okay the live:cut Interface will be shown and you can start working with your live:cut Project.
Close a live:cut Project
Go to the menu “File → Close Project”. The live:cut Project will be closed and the Just Control interface will be displayed again.
Open an existing live:cut Project
Open the folder “~/Documents/LiveCut Documents/Projects” and double click the Project file (*.lcproj) you want to open.
live:cut opens the Project and displays an already filled out EDL. You may export the Project again by using the menu “Project → Export to …”
live:cut Project Templates
Create a live:cut Project Template
Make sure your are in a live:cut Project. To open a previously saved live:cut Project refer to the instructions above. Go to the menu “Project → Create Template”.
Enter a Template name and press the “Save” button. Such Project Templates can be used with every live:cut Project start.
Use a live:cut Project Template
Open Just Control, select the Channels, you want to use for your live:cut Project and and start a new live:cut Project (Go to the menu “File → New live:cut Project”).
Select your Project Template from the drop-down menu and use the “Create” button to start the live:cut Project.
Remove a live:cut Project Template
Make sure that Just Control is currently not running. In the Finder Window go to your User folder. Open the folder “~/Documents/LiveCut Documents/Project Templates” and Delete the desired Project Template.
Start a Multicam Recording
Before starting a Multicam Recording you have to ensure that your live:cut Project Settings are configured properly. Refer to the chapter Project Settings.
If you have already configured the Project Settings you can head straight to the chapter Start a Multicam Recording.