4.4 Inspector (v.5.x)
- Georg Deisting
- Manuel Grund
The Just Control Inspector (“Inspector”) shows the attributes of a selected item. You can click on the individual fields to edit the attributes. This figure shows the different states of the Inspector. Click on the figure to see a larger view.
Using the Inspector
Enter values directly using the keyboard.
Use the “Up/Down Arrow” keys to increase/decrease values.
Use the “Left/Right arrow” keys to switch between values.
Use the “Tab” key to switch between fields.
General Inspector Overview
Name of the selected item: Shows the name of the item currently selected in the Workbench.
Schedule/Workflow Tab:
Schedule: Use this tab to change the attributes of the selected (scheduled) item(s).
Infinite Graphics: Use this tab to control the Infinite Graphics on air.
Standard Attributes: Shows all the standard attributes depending on the type of the selected item.
Item Specific Attributes: Shows all the element-specific attributes.
Slow Motion: This allows you to control playback speed of the video.
Audio: Shows audio-specific settings.
Control Allows you to define the track the element will use, the finished action, and if the element will be looped or played only once.
"Fast Access" Button: Changes in context to the selected element.
Video: Allows you to trim the Video.
Audio/Still Image/Event: No function.
Graphic: Allows you to reset all input ports (= reset all attributes to their default value).
Folder: Allows you to reset the Next Actions ports to the value defined in the just:live preferences.
Video Specific Attributes
Click on a Video in the Workbench to load it into the preview window and to change its attributes in the Inspector.
Standard Attributes
Name: Name of the Video.
In/Out Point: Sets the in/out point of a Video.
Duration: Shows the duration of the selected Video depending on the defined in/out-point.
Color: An element may have a colour defined by selecting it in the Inspector. The colour of each element is also shown in a column in the Workbench (if this column is enabled). When dragging and dropping elements from the Library, the Finder colour (if defined) will automatically be set for the element and shown in the Workbench.
Video
Fade In/Out: Videos can fade in/out up to 10 seconds from and to black.
Cross Fade: Instead of fading from/to black, it is possible to fade from/to the passed-through live signal. Please contact your system administrator if you are unsure whether your Channel has been configured using this method or not.
Invert Fields: Invert fields. This can also be changed during Playout of the selected Video and will be executed immediately.
Aspect Conversion: Defines how to handle the aspect ratio of the selected Video. Your system administrator should have already predefined a setting in the Just Out engine preferences. Several options are available depending on the direction of the conversion. For a visual description, please refer to the chapter Aspect Ratio Control. It is possible to change the aspect ratio while a Video is on air.
Slow Motion
Playback Speed: Allows you to set the playback speed of a Video clip (“25%”, “33%”, “50%”, “66%”, “75%” and “100%”).
Deinterlace: Deselect this option in case you are using another playback speed than “100%” and the Video has fields and not frames.
Audio
Fade With Video: When enabled, the Audio will automatically fade with the Video's fade-in/out settings.
Volume: Allows you to adjust the volume of a Video with a value between “0” (muted) and “1” (full volume). The volume can be changed while a Video is on air, and the change will be taken over immediately once the mouse button has been released.
Live Volume: This is the volume of the live input. By default, the Live Volume is set to “0” (muted).
Control
Track: just:live reflects the activated Layer count for the active Channel, so there can be multiple Layers available for Playout. If you have more than one Video or FX Layer, you can load an element to the Layer of your choice. Select the element, then set the target Layer you want to use in the Inspector.
Finished Action: Use this function to define which action is executed once the end of the selected Video is reached.
Loop: Activate this checkbox to play the selected Video in a loop.
Trim Clip: Allows you to trim the Video clip which is loaded in the Preview window.
Audio-Specific Attributes
Click on an Audio file in the Workbench to change its attributes in the Inspector.
Standard Attributes
Name: Name of the selected item.
In/Out Point: Sets the in/out-point of the item.
Duration: Shows the duration of the selected item, depending on the defined in/out-point.
Color: An element may have a colour defined by selecting it in the Inspector. The colour of each element is also shown in a column in the Workbench (if this column is enabled). When dragging and dropping elements from the Library, the Finder colour (if defined) will automatically be set for the element and shown in the Workbench.
Audio
Channels: Shows the number of Audio tracks coming with this Audio file.
Volume: Allows you to adjust the volume of an Audio file with a value between “0” (muted) and “1” (full volume). The volume can be changed while the Audio is ON AIR and the change will be taken over immediately once the mouse button has been released.
Live Volume: This is the volume of the live input. By default, the Live Volume is set to “0” (muted).
Control
Track: just:live reflects the activated Layer count for the active Channel, so there can be multiple Layers available for Playout. If you have more than one Audio Layer, you can load an element to the Layer of your choice. Select the element, then set the target Layer you want to use in the Inspector.
Finished Action: Use this function to define which action is executed once the end of the selected Audio file is reached.
Loop: Activate this checkbox to play the selected Audio file in a loop.
Realtime Graphic Specific Attributes
Click on a realtime Graphic file in the Workbench to change its attributes in the Inspector. All published input ports of a realtime Graphics item can be changed while it is on air.
Standard Attributes
Name: Name of the selected element.
Duration: Shows the initial duration of the selected element. In case the GFX element has one or more stop frames, the length can change depending on the length of a stop frame will be on hold.
Color: An element may have a colour defined by selecting it in the Inspector. The colour of each element is also shown in a column in the Workbench (if this column is enabled). When dragging and dropping elements from the Library, the “Finder” colour (if defined) will automatically be set for the element and shown in the Workbench.
Control
Track: just:live reflects the activated Layer count for the active Channel, so there can be multiple GFX Layers available for Playout. If you have more than one GFX Layer, you can load an element to the Layer of your choice. Select the element, then set the target Layer you want to use in the Inspector.
Finished Action: Use this function to define which action is executed once the end of the selected GFX element is reached. Finished actions that are not available for GFX elements are greyed out.
Loop: Activate this checkbox to play the selected GFX element in a loop.
Input Ports
Slider (not visible above): A slider can be used to define a value, roughly. The exact slider value is displayed in the text box on the right of it. This text box can also be used to modify the slider's value. A slider value has a minimum and maximum value.
Number Variable: A number value that can be positive or negative.
Text Field: Text in this field can be changed at any time. It accepts all characters.
Checkbox: A checkbox is a boolean value (it can be unchecked or checked, “False” or “True”). In this case, the checkbox enables or disables a certain element inside the selected Graphic.
Color Value (not visible above): Clicking on the colour bar opens a colour picker.
Revert All Input Ports: This allows you to reset all input ports (= reset all attributes to their default value).
Event-Specific Attributes
Most Events have no specific attributes, so only the standard attributes and the control attributes are available. Events like SCTE-104 and router controls can display their specific settings, and this also allows you to change the settings directly in the Inspector. You can execute Events on the Event Layer, but also as a start/finished action of a Video. Please refer to the Chapter 6.11 Start/End Events (Secondary Events) (v.5.x) for further information.
Standard Attributes
Name: Name of the selected Router/GPI element.
Duration: The duration of Router/GPI Events is always one frame.
Color: An element may have a colour defined by selecting it in the Inspector. The colour of each element is also shown in a column in the Workbench (if this column is enabled).
Control
Track: just:live reflects the activated Layer count for the active Channel. You need at least one Event Layer to be able to execute Router/GPI Events.
Finished Action: Use this function to define which action is executed once the end of the selected Router/GPI element has been executed. Finished actions that are not available for Router/GPI elements are greyed out.
Loop: Activate this checkbox to play the selected Router/GPI element in a loop.
Folder-Specific Attributes
To define the attributes of a Folder, select the Folder in the Workbench and define the attributes in the Inspector. Doing so, all Videos and all Graphic elements that are dropped into that Folder will get the attributes defined here.
Standard Attributes
Name: Name of the selected Folder.
Playlist: Activating the "Playlist" option adds a Playlist icon beside the Folder name in the Workbench. Clicking once on this icon loads all elements into the Timeline in the order in which they are listed in the Workbench. This feature is very useful if you want to load several elements into the Timeline with a single click. Dropping a Playlist from the Library into the Workbench activates the Playlist function automatically.
Locked: Lock a Folder to make sure that no elements within this Folder are added/removed or changed.
Default Video Track: Activate the “Enable” option first. This allows you to define which Video track will be automatically assigned to each Video dropped into that folder. The number of Video tracks available here depends on the configuration of your Channel.
Default Graphic Track: Activate the “Enable” option first. This allows you to define which Video track will be automatically assigned to each Graphic dropped into that Folder. The number of Graphic tracks available here depends on the configuration of your Channel.
Default Video Next Action: Activate the “Enable” option first. This allows you to define which “Next Action” will be automatically assigned to each Video dropped into that Folder.
Default Graphic Next Action: Activate the “Enable” option first. This allows you to define which “Next Action” will be automatically assigned to each Graphic dropped into that folder. Attributes defined here for a Folder are overwriting those presets defined in the just:live preferences.
Reset To Preset: This button allows you to reset the “Next Actions” ports to the value defined in the just:live preferences.
Infinite Graphics
Shows the name of the template as well as the name of the Layer. Below are the Published Input Ports. Depending on the Graphic template, you will see alternate attributes here, or even no options at all. The template seen in this figure was made with Composition Builder and the Infinite Graphics has been defined in Just Control. Here in the user interface, you can turn the Graphics on and off or change its (published) attributes. Please contact your system administrator if you have questions about the Infinite Layer configuration.
Simple Graphics (SFX)
For each video in the Workbench, you can define, if the Channel Bug and/or the Live Bug should go on air or not. Such Simple Graphics (SFX) elements (as well as the length of the fade In/Out) have to be defined before for this channel in the Settings tab of the Multi viewer.