just:in 5.0 Release Notes

Just In 5.0.0.GM.1009 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that enabled the “Audio Monitor” and “Clear All Audio Peaks” menu items after selecting an empty (not connected) viewer in the multi-viewer.

 

Just In 5.0.0.GM.1008 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a crash in just:in engine that could occur when just:control was connected to a channel and was quit unexpectedly (e.g. crash, “Force Quit”, restarting the system).

  • Fixed a crash in just:control entering a new device with “special characters” that require special formatting according to the URL specification (e.g. space).

  • Renamed the “Clear All Errors / Warnings” menu item to “Clear All Error And Warnings”, and disabled the action when no viewers are selected in the multi-viewer.

  • The “Audio Monitor” and “Clear All Audio Peaks” menu items and disabled when no viewers are selected in the multi-viewer.

 

Just In 5.0.0.GM.1007 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • When writing H.264/AAC/Stereo files, audio is now 48KHz instead of 44.1KHz.

  • Fixed issues related to selecting a channel’s calendar in the “Schedule” inspector group.

 

Just In 5.0.0.GM.1006 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • The “Show scroll bars” system preferences setting is now always respected by just:control.

  • Fixed some encoding performance issues when the input is UHD.

  • Moved the channel calendar selection from the channel settings to the inspector “Schedule” group to resolve conflicts when running just:control on multiple systems. Additionally this means that the calendar can be changed dynamically without needing to stop the channel.

  • When the “Confirm Stop Recording” preference is enabled, clicking the “Stop” button for a group beneath the inspector will show a confirmation alert asking you to cancel or confirm the action.

 

Just In 5.0.0.GM.1005 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed crashes ingesting UHD on certain AJA cards capable of 12G SDI.

  • Stability and performance improvements when recording Avid DNxHD.

 

Just In 5.0.0.GM.1004 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Updated the ToolsOnAir EULA.

  • Updated to AJA 16.1 drivers, please install this version when using AJA hardware.

  • Updated to NDI 5.0.

  • Fixed crashes ingesting UHD on certain AJA cards capable of 12G SDI.

Just In 5.0.0.GM.1003 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • TOA System Checker now reports the correct version of macOS when running on 11.0.

  • When saving metadata sets, the “Startup XML” is now pretty-printed for improved readability.

 

Just In 5.0.0.GM.1002 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Added “psf” or “progressive segmented frame” modes for AJA devices.

 

Just In 5.0.0.GM.1001 Release Notes

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • 5.0 Golden Master.

Just In 5.0.0.B1.1000 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that could result in a recording having an incorrect duration if it was stopped by a loss of signal.

Just In 5.0.0.B1.999 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved issues with UHD using AJA devices and quad-link SDI input.

 

Just In 5.0.0.B1.998 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that resulted in incorrect or invalid metadata files when using metadata fields in a naming preset.

  • Updated the copyright in the individual Apps to 2021.

  • Updated Blackmagic Decklink drivers to 12.1, please use this version when using Blackmagic hardware.

  • Updated file metadata when writing MXF files to the correct just:in version.

 

Just In 5.0.0.B1.997 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Added support for AJA cards with HDMI inputs, as well as “mixed” SDI and HDMI inputs. For example, a card with 4 SDI and 1 HDMI input can have 4 channels running, 3 using SDI and one using HDMI input.

  • Fixed a bug that stopped channels recording UHD when memory usage reached 4GB. The limit has been raised to 16GB.

  • Resolved a bug that sometimes caused channels to “reset” or “lose” their capture and destination presets after stopping and starting the channel in the configuration panel.

  • When a “popover” window with additional capture preset settings is open (e.g. audio mapping, timecode overlay) it is no longer possible to quit just:control until the settings window has been closed to prevent settings being lost when quitting with the window open.

  • Removed “Avid OP1a” as a capture preset container option.

 

Just In 5.0.0.B1.996 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Added a new metadata field “%Just_In_No_Extension_Clipname” that writes the name of the recorded file minus any file extension.

  • Resolved UI layout issues running on macOS 11.0 Big Sur.

Just In 5.0.0.B1.995 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that could lead to incorrect computer time after changing the device’s frame-rate.

  • Resolved crashes related to devices that have more channels defined than are licensed. Now unlicensed channels can be started with the Tools On Air watermark.

 

Just In 5.0.0.B1.994 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Logs are now archived every 24 hours to the folder ~/Library/Logs/ToolsOnAir, and these logs are included in the system profile. This means that logs are now available going back further than the current 3 days.

  • It is now possible to remove NDI channels (previously after a restart of just:in engine, removed channels appeared again).

  • Removed the “Action on timecode break” option from the channel configuration panel for NDI channels.

  • Updated the documentation links in the DMG for version 5.0.

  • Recording closed captions to MXF containers is now supported for additional codecs (e.g. AVC-I).

  • Updated AJA drivers to 16.0.2, please use this version when using AJA hardware.

  • Fixed a crash when starting a recording with an invalid timecode source selected (e.g. capture card without a valid timecode source attached).

 

Just In 5.0.0.B1.993 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug where opening the Configuration Panel (or pressing cmd-alt-,) during initial device setup resulted in a second configuration “wizard” being shown.

  • Newly created NDI channels are now disabled by default to allow for final configuration before being enabled.

  • Fixed a bug where adding new naming presets did not always result in the new preset being shown in the selection menu in the inspector.

  • Resolved a bug where changing or updating a naming preset in the Configuration Panel and then selecting it in the inspector did not show the correct fields for the updated preset.

  • It is now possible to drag and drop devices within the Configuration Panel in order to change their order. The new order is then reflected in the “Connections” tab in the inspector and remains after quitting and restarting the Apps.

  • Added a new “Audio Monitor” menu item to the “View” menu with the shortcut cmd-alt-A to toggle the audio monitor for any selected channels.

  • Fixed a bug that resulted in high CPU usage for “scaled” capture presets, for example using a SD capture preset for a HD input.

  • Added a new “Clear All Warnings / Errors” menu item with the shortcut ctrl-W to the “View” menu to quickly clear any warnings and errors for any selected channels.

 

Just In 5.0.0.B1.992 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that resulted in “scaled” capture presets (e.g. SD with HD input) not scaling the input and instead recording the input in its native resolution.

  • The “first setup” has been improved so that all newly created channels are automatically configured, started and connected to the multi-viewer.

  • The example metadata preset created when first setting up a new device has been updated.

  • Added a warning in the channel configuration for Blackmagic devices that require 10-bit input for VANC (e.g. closed captions). The majority of recent devices from Blackmagic support VANC in both 8-bit and 10-bit.

  • When setting up a new Blackmagic device, the modes available for selection now correctly mirror those actually supported by the device (e.g. UHD and UHD2).

Just In 5.0.0.B1.991 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Resolved multiple issues related to “Batch” recording mode.

  • It is now possible to create H.264 capture presets with 4:3 aspect ratio.

  • When recording H.264 to either MOV or MP4 containers, the aspect ratio is now correctly written to the file.

  • Updated the Avid DNxHD encoder for improved stability and performance.

Just In 5.0.0.B1.990 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Disabled the “Schedule” recording mode for NDI channels as this is not currently supported.

  • Removed the “Auto” video format from NDI channels as this is not currently supported.

  • NDI channels now show “No Signal” when the incoming stream does not match the channel’s selected video format (resolution, frame-rate, scan).

  • NDI channels now correctly process interlaced streams.

  • Fixed a bug that meant naming conventions could not be removed (they were shown as removed in just:control, but appeared again once just:in engine was re-started).

  • When adding capture, destination, naming or metadata presets in just:control, they are automatically shown in inspector for the selected channel instead of having to restart just:control or select “-“ in the dropdown menu to reload them.

  • Fixed an issue causing significantly higher CPU usage for certain capture presets.

 

Just In 5.0.0.B1.989 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed an issue after connecting to a channel initially in “Scheduled” recording mode and then switching to “Crash” recording mode where the “Naming” group in the channel’s inspector did not show the available naming presets.

 

Just In 5.0.0.B1.988 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Incoming SDI color metadata (e.g. UHD SDR/HDR) are now read with AJA and Blackmagic devices and respected when encoding.

  • Fixed a bug recording p25 or i25 NDI sources where the recorded file reported an incorrect frame-rate.

  • Updated the license protection “blips” with 2021 Tools On Air logos.

 

Just In 5.0.0.B1.987 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • An error is now reported in just:control after trying to record with a capture preset when the given encoder is not installed on the system running just:in.

  • When recording UHD into a MOV container the correct metadata is now written to the file regarding color space (BT.2020 instead of BT.709).

  • It is now possible to disconnect a channel in the multi-viewer that was connected to a channel that was already in use by another user (viewer has the status “IN USE”).

Just In 5.0.0.B1.986 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Stability improvements when using NDI channels.

  • The current configuration for NDI channels (e.g. capture, destination and naming presets) are now correctly saved between sessions (quitting and re-starting just:in engine).

  • Fixed a bug that resulted in incorrect computer timecode when using NDI channels.

  • Fixed crashes when writing to an invalid path or after a fallback due to slow storage.

  • Removed unsupported “psf” and “RGBA” modes.

Just In 5.0.0.B1.985 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed a bug that prevented the “Show Logs” button in just:in engine’s diagnostics window correctly showing the logs in the Terminal window after opening.

  • Disabled the “end-to-end SDI” checkbox in the channel settings for all devices other than AJA.

  • Fixed a bug that resulted in an “empty” multi-viewer layout after upgrading from just:in mac 4.0.

  • When logging into just:control for a user without any device connections defined, only the “splash” welcome screen is now displayed, and now the previous multi-viewer layout in the background.

  • When creating a new NDI channel for just:in mac, the initial recording mode is now “Crash” instead of “Batch”, and the “Batch” recording mode is greyed out as it is not supported by NDI channels.

  • NDI channels now display “Computer Time” as the only valid timecode source.

Just In 5.0.0.B1.984 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Fixed several memory leaks related to each recording (also e.g. chunk recording for each chunk).

  • Updated to Blackmagic Decklink 12.0 drivers, please update if you are using Blackmagic devices.

  • NDI channels are now active again but only for testing purposes and not for production.

 

Just In 5.0.0.B1.983 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Introduced a new channel setting to enable end-to-end SDI for certain AJA cards (e.g. Kona 1 and Kona 4 with UFC firmware) with “fixed” inputs and outputs. When enabled, input #1 will also be routed to output #1 and so on.

  • When recording with a H.264 capture preset, an error is now shown in just:control if no hardware encoder was available and a software encoder is being used instead as a software encoder will usually result in significantly less performance.

Just In 5.0.0.B1.982 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Added a warning alert to just:out and just:control if the system doesn’t have the “Pro Video Formats” bundle from Apple installed.

  • The “Just Control Help” menu item in just:control’s “Help” menu now opens the landing page for all Tools On Air product user manuals.

  • Fixed a crash in just:control and duplicated channels after configuring a new device and restarting just:control and/or changing the device’s frame-rate.

  • Resolved an issue configuring newer AJA devices that support 12G SDI (e.g. Kona 5, IoXT+).

  • Removed the “Virtual Device” with 0 channels when configuring a new AJA or Blackmagic device.

Just In 5.0.0.B1.981 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 5.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Updated to the latest AJA (16.0) and Blackmagic (12.0) drivers, please install these versions depending on your hardware.

Just In 5.0.0.B1.980 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Devices are now stored per multi viewer layout instead of per user to prevent issues removing or adding devices.

  • Updated menu keyboard shortcuts and disabled certain menu items when the inspector is disabled or the user is logged out.

  • Fixed a memory leak related to NDI channels with just:in mac.

 

Just In 5.0.0.B1.979 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • Reorganised the “View” and “Channels” menus, so that all of the items related to changing the view (e.g. Split multi viewer channel) are now in the “View” menu and all items related to configuring channels or performing actions on a channel are in the “Channels” menu.

  • Added system-standard keyboard shortcuts for entering full-screen, switching to the next and previous tab.

  • Fixed a bug where logging out a user and logging in another user was not updating the channel configuration panel with the new user’s devices.

  • Resolved issues releated to starting recording via the menu or keyboard shortcut with multiple channels selected.

 

Just In 5.0.0.B1.978 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • When creating a new multi-viewer layout template or logging out the current user in just:control, any changes to the current layout template are first saved.

  • There is a new preference in just:control to automatically log in the previous user instead of showing the log in splash screen. This option is only available for users that do not have a password defined.

  • When logging out the current user in just:control, or changing the user's name, any previously entered password is now cleared.

  • During log in and device configuration, the inspector is disabled and cannot be opened. When logging out the current user, the inspector is automatically closed.

  • Fixed an issue using the cmd-R keyboard shortcut or "Toggle Recording" menu item.

  • The main window's title now shows the name of the current multi-viewer layout template.

  • When a just:in mac or linux device goes "offline" (e.g. after a crash or quit), just:control no longer switches to the "Connecting..." screen. Instead, the individual channels show a "Disconnected" status.

  • When connecting via the initial setup splash screen, selecting "Cancel" in the device setup wizard now results in just:control quitting.

  • Fixed a bug that prevented devices being removed correctly in the configuration panel.

  • Groups, selection and inspector open/closed state are now stored per-user.

  • Resolved a bug connecting to a device in the initial setup splash screen after entering an IP address where the entered address reverted to the previously entered value.

  • There is a new "Users" tab in just:control's preferences panel that allows use to remove users, set passwords and remove or rename multi viewer layouts.

  • The initial setup splash screen now has the local IP address as the default value instead of "localhost". This is because using "localhost" can result in connection issues later connecting from remote systems.


Just In 5.0.0.B1.977 Release Notes

  • This is a 5.0.0 Beta pre-release.

  • Apple have removed support for 32-bit Apps and, as a consequence, for the QuickTime framework. Apple's replacement for QuickTime, AVFoundation, does not support the full range of codecs that were available with QuickTime. If you had an older version of just:in installed, any capture presets using QuickTime will be automatically upgraded to us AVFoundation, assuming an equivalent is available. Some capture presets may therefore no longer be available after installing this version. A full list of the codecs and any other features affected by the switch to 64-bit will be made available by ToolsOnAir in due course.

  • This version requires a new 4.0 license code, invalidating any older 2.0, 2.5, 3.0, 3.5 or 4.0 license codes. If you already have a valid license code for an older version, please contact ToolsOnAir for a new code before installing this build.

  • The configuration of just:in mac engine (channel configuration, capture presets, destination presets, naming conventions, metadata sets and activation) has moved from the engine App to the user interface (just:control App). To configure an engine, start just:control and select "Manage Connections" from the "View" menu.

  • This version of just:control now supports multiple users and user switching. When you start just:control you will see a log-in screen allowing you to enter username, an optional password and a layout template. By default, the username will be the currently logged macOS user. If you have been using previous versions of just:in and just:control, you can probably simply click "Login" to create a new user with your current login name. Once you have logged in (and assuming you have previously logged in as this user) you will see the selected multi-viewer layout. The "Just Control" menu has an additional "Log Out ..." menu item that will disconnect all channels and devices and return you to the log-in screen where you can select a different user, or the same user with a different layout template. The "Channels" menu now includes a "New Multi-viewer Layout Template" menu item that allows you to duplicate the current layout template with a new name. Any changes to this layout (e.g. split or join channels, connect new channels) will be made to this new template, so logging out and selecting the previous layout template will return you to the previous layout. This allows you to create different layouts that you can quickly switch between depending on your current job.

  • Fixed a bug that allowed invalid timecodes to be entered for channels using 59.94 drop-frame timecode.