just:in mac is not activated by default and therefore a ToolOnAir watermark will be added to all Recordings.
Activation is not required to test the just:in mac solution (Just In Engine and Just Control).
Activate a Device
Open the Just Control Configuration Panel, select a Device and switch to the “Activation” tab.
To make any changes make sure to unlock the Just Control Configuration Panel.
Copy and Paste the Activation Key you have received into the “Activation Code” field and either press the "Enter-key” or the "Activate" button. When the Activation was successful the Activation status in the Activation Status and Option List changes from yellow to green.
Please make sure that the Just In Engine application gets restarted after adding the Activation Key.
Switch Activation between Channels
If you are working with frequently changing setups, like for instance using four licensed SDI channels (e.g. with an AJA KONA 4), and you need to change that configuration to use three of these SDI channels with one (1) additional NDI®5 channel, then please make sure that you only enable the number of licensed channels in use (in our case 4 channels) and not all of them, as you might exceed the number of totally licensed channels on that particular machine.
Please make sure that you restart the Just In Engine application, after changing the enabled channels.
Please contact us if you have further questions regarding any TOA License Activation.
Transfer license
If you want to transfer a license from one to another machine, please contact us via our Support Helpdesk and will guide you through that process. A license transfer from one machine to another can be easily done if an active Support and Software Maintenance contract is in place.