Tools On Air Preference Pane
Upon the first launch of the Just In Engine application a new preference pane called ToolsOnAir will be installed on the machine.
Stay Alive
The Stay Alive feature can be used to select certain applications that should be automatically started and additionally should be "kept alive" at all times. Only the applications installed on the specific system are available for selection, any other applications in the list will be disabled in the Stay Alive preference pane.
Power Outage: once the power returns and the system restarts, the particular application(s) automatically starts.
Unexpected Application Termination: should an application crash at any time, it will automatically be restarted by the system.
Maintenance Purposes: we recommend to restart the Just In Engine application once per week.
Make sure that the applications you are going to enable in Stay Alive are quit before you activate them.
Start an Application using Stay Alive
When an application is enabled for Stay Alive, that application will always be started by the system (first after booting, then automatically whenever the application terminates for any reason).
Stop an Application using Stay Alive
Deactivate the checkbox in front of the application to stop it. Then a warning appears which informs you that turning off Stay Alive will quit the selected application immediately. Click Yes to quit the application.
Optional: Required Path
When a volume or folder is specified in the Required Path section, the respective application will only be started when the specified volume/folder is mounted/present. This may be useful if you have a NAS, SAN or other types of file systems that must be mounted during system startup that may take some additional time before they are available.
In this case it is important not to start any ToolsOnAir applications that may rely on data from these file systems until the volume is available. By specifying such volumes in Stay Alive you can make sure that any ToolsOnAir application gets not started, until the relevant volume/file system is available.
Optional: Scheduled Restart
It is possible to schedule an automated restart for all applications which are controlled by Stay Alive at a predefined time. Activate the No restart checkbox and define the time and day the selected element should be restarted.
