Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Start just:connect.
  2. The New Channel Wizard shows up.
  3. Make sure the New Channel checkbox is ticked.
  4. Follow the guideline below to configure your new Channel.

The New Channel Wizard 

Image Removed1. Enter the Name which should be used for the Channel.

Image Removed2. Select the Format the Channel will use for broadcast.

  • Make sure that the frame rate of your Videos is the same as the one selected here.
  • You can change the frame rate of an existing Channel. Doing so will delete all existing rundowns from that Channel.
  • The up/down/cross conversions offered by the AJA/Blackmagic Video hardware can be used independently of the selection here (depending on the device). In addition the just:out-based up/down conversion can also be used. 

Image Removed Select 3. Select the Type of User Interface you would like to use with this Channel.

  • just:play for 24/7 Scheduled Playout.
  • just:live for Live Playout.

Image Removed Define 4. Define the Master Engine which should be used for this Channel.

...

By default we use port 49152 which should only be changed in case the port is already in use.

Image Removed Define 5. Define what kind of Video hardware you would like to use for the final output:

  • Screen: in case there is no Video hardware available for the final output on the machine running just:out.
  • AJA: in case you have a supported AJA Video device installed on the machine running just:out.
  • Blackmagic: in case you have a supported Blackmagic Video device installed on the machine running just:out.

Image Removed Define 6. Define the paths to the Repository Folders which you would like to use as your main sources for the Videos, Graphics, Audio and Workflow files as well as saved Playlists.

...