...
| Table of Contents |
|---|
...
While it is possible to install just:out, just:connect and just:live/just:play on a single machine, there's also the possibility to distribute the playout components to multiple machines. This chapter covers different setup variants.
| Info |
|---|
For detailed instructions on how to deploy just:live or just:play on a machine, refer to the chapter Software Installation. |
...
- just:connect is installed on the Master and the Slave Playout machine.
- On the Master Playout machine, just:connect is started.
- On the Slave Playout machine, just:connect is not started. In case the Master machine running just:connect fails completely, the Slave machine can take over.
- One or multiple just:live/just:play user interfaces are controlling this Channel.
- This setup can also be reproduced in cases where more than one Channel is required.
| Info |
|---|
Using the optional failover:control, we recommend to use just:connect on the Slave Playout Machine and not on the Master or on a separate machine like described below (Maximum Setup). This allows to execute the failover switch even in case the master engine fails completely. |
Maximum Setup
- Multiple just:out engines are available on the network.
- The engines are managed by just:connect which provides the Channel configurations in the network.
- The users can connect to the Channels with the just:live/just:play user interface.
- This setup can also be reproduced in cases where more than one Channel is required.
...