General
The BMD HyperDeck Event Device can be used to trigger recordings on an external HyperDeck Device. Furthermore it is possible to set the file name as well, so that both the just:in mac and the HyperDeck recording have the same file naming. Please see the BMD HyperDeck Workflow Description for more details.
Devices
Select the TCP Event Device, set a “Timeout/Delay Delay” value and enter the IP address of the BMD Blackmagic Design HyperDeck device and press the “Add…” “Add…” button.
...
Within the new window select “Blackmagic HyperDeck” “Blackmagic HyperDeck” from the presets list and press the “+” button. With this Event Device Configuration it is possible to create Play, Record and Stop Event Presets.
...
If the recorded files on the BMD Blackmagic Design HyperDeck should have a matching file naming with logic as for the just:in mac channels, then select “Blackmagic “Blackmagic HyperDeck Named Record” Record” from the presets list.
| Info |
|---|
Please beware that with the “Blackmagic “Blackmagic HyperDeck Named Record” Record” preset option, recordings can only be started. To stop on ongoing record, a standard BMD HyperDeck Event Device is required. Fore more details, please see the the BMD HyperDeck Workflow Description. |
Once the configuration is done, press the “Ok” “Ok” button to save the Event Device.
Presets
When the Event Device is finished, a new Event Preset can be created. Add a new Preset, set a name, select the BMD HyperDeck device and press the “Add” “Add” button. Then set the value to “Record” “Record” and save the Event Preset by pressing the “Finish” “Finish” button.
...
Once that is done, this Event Preset is available within the Channel Inspector.
...