Using an Apple silicon-based Mac for the machine running Just Out, the AJA driver version 16.2.x or higher is recommended.
Using an Apple silicon-based Mac for the machine running Just Out, the Blackmagic Design driver version 12.7 or higher is recommended.
The HDMI output of the Mac can NOT be used for the broadcast output signal. Please ensure that one of the dedicated video devices listed below is used.
This chapter contains a list of supported video devices for playout in SD, HD or UHD. When using a Thunderbolt device from AJA, Blackmagic Design or PCI card (in a Sonnet enclosure), please ensure that the speed of the Thunderbolt bus is at least 20 Gbit/s (i.e. Thunderbolt 2). This is especially important when playing out in UHD. Connections using 40 Gbit/s (i.e. Thunderbolt 3) are preferred.
SD | HD | SD | HD | SD | HD | UHD |
|---|---|---|
|
|
|
1 Legacy. This device has been working with previous versions of Just Out, but is not available for purchase from AJA/Blackmagic Design anymore. Please check if there are drivers available for your device supporting macOS Monterey (12.7.x) or higher from AJA/Blackmagic Design, which will make the hardware compatible with our software.
2 No Support for VANC insertion (CC, OP47, SCTE).
Listed here are those UHD devices which we have tested with UHD playout up to and including p30. However, it is possible that other devices which also support UHD will work as well.
For playout of higher frame rates in UHD (up to p60), a MacPro7,1 or an Apple silicon-based Mac is required.