This User Manual describes how to install and configure ToolsOnAir's playout applications version 3.0 on Macintosh systems running macOS Catalina(10.15.x).

You will learn how to…

• Install and set up the required hard- and software infrastructure.

• Monitor the system to ensure Just Control continues to run effectively.

• Do installations and maintenance on your own.
   

Assumptions

• You are familiar with the Macintosh environment.

• You have system administrator privileges for the network and the operating systems of the machines you are working on.

• You are experienced in installing and configuring client-server software in a TCP/IP network.

• You will install the software on machines that have been connected to a LAN or WAN by a network engineer.

• You will install the software on a machine which has no other software installed – except the operating system and the drivers needed to operate the channel/hardware.

• You understand the basic broadcasting concepts of the just:live/just:play user interface, e.g. the method which is used for broadcasting the output of the just:live/just:play system.

• You understand general video technologies like codecs, frame rates, transmission methods and timecodes.

Customers using Teamviewer to access the Mac running just:out

Using Teamviewer to access a machine running just:out, make sure you have the following settings deactivated in the Preferences of the Teamviewer client (the machine you use to connect to the machine running just:out).

Open

Failing to do so will switch the audio output away from the video device the same time you connect to the machine running just:out using Teamviewer.

Contents of this User Manual

• Installation of the playout software and the configuration of the just:live/just:play user interface.

• Listing of possible hardware configurations.

• Configuration and administration