Crash Recording records Video signals on the fly.
It is required to select a Naming Preset, a Capture Preset and a Destination Preset. If you wish you may modify the other settings.
|
Now hover over the Channel View. Next to the Inspector button there's a Record button. Press the this button to start the Recording (shortcut: command +R).
If the Record button does not show up, verify your Capture and Destination Presets in just:in Engine and that you have selected one here in the Inspector. |
While recording you can enter a Timecode that is in the future to automatically stop a Recording on that given Timecode.
To stop the Recording, click the Record button again. The recorded clip will be available in the filesystem.
Double click on Destination Preset in the Inspector to navigate to the folder where the clip is saved (only available if the user interface can access the storage location with the same path as the engine). |
You may do multiple Recordings of a single video source at the same time to the same or to multiple destinations. This feature is limited by the hardware specs of the machine running just:in Engine.
We strongly recommend to do thorough testing before using this feature in a live event. |
Make sure that the Capture-IDs are recording to different storage locations or have different file name extensions (*.mov, *.mxf or *.mp4). |