The Inspector is used to select your Capture Settings (such as Naming-Conventions, Metadata-Sets, Capture- and Destination-Presets…). This chapter explains all Inspector options and also shows how the Inspector changes depending on the currently selected Recoding Mode.
Before you are able to use the Inspector it is mandatory that the just:in user interface is connected to a Channel which is configured and running in just:in Engine. Refer to the chapter just:in v3.0 Administrator Manual if you have not yet configured the Channel(s) yet. |
For detailed information on how to make a Recording please refer to the chapter Capture Modes. |
The Inspector changes depending on the Recording Mode you are using. This shows the Inspector when in Crash Recording Mode.
For detailed information on how to make a Recording please refer to the chapter Capture Modes. |
The Inspector changes depending on the Recording Mode you are using. This shows the Inspector when in Batch Recording Mode.
For detailed information on how to make a Recording please refer to the chapter Capture Modes (just:in v3.0). |
The Inspector changes depending on the Recording Mode you are using. This shows the Inspector when in Scheduled Recording Mode. At the top of the Inspector all Apple Calendar Events for that particular Channel are listed.
In Schedule Mode there is no record button available and recording will start and stop automatically according to the start- and end-time of the Calendar events. |