The Inspector is used:
This chapter explains all Inspector options and also shows how the Inspector changes depending on the currently selected Capture Mode.
Before you are able to use the Inspector it is mandatory that one of the Channel Viewers in the just:in User Interface is connected to a Channel which is configured and running in just:in Engine. Refer to the chapter just:in v4.0 Administrator Manual if you have not yet configured the Channel(s) yet. |
For detailed information on how to start a Recording please refer to the chapter Capture Modes. |
The Inspector changes depending on the Capture Mode you are using. This shows the Inspector when in Crash Capture Mode. Many of the settings are the same for the other Capture Modes.
A Channel may have multiple Capture IDs and can therefore record in multiple formats. Keep in mind that this can put high load on the system(s) running just:in Engine. Thorough testing upfront is a must! |
The Inspector changes depending on the Capture Mode you are using. The Crash Recording Inspector is shown above.
For detailed information on how to start a Recording please refer to the chapter Capture Modes. |
The following shows the Inspector when using Batch Capture Mode.
For detailed information on how to make a Recording please refer to the chapter Capture Modes. |
This shows the Inspector when in Schedule Capture Mode.