The System tab is mainly used for maintenance tasks like checking and saving log files, or restarting the Engine or just:connect remotely or to save a backup file of the just:connect settings, which can be useful for restoring older configs at some point.

Table of Contents

Overview

1. Log files: select one of the available Log files here.
2. Refresh button: to update a displayed Log file you must press the Refresh button.
3. Log File Display: displays the content of the selected Log.

4. Save Log File: saves the selected Log file to a destination of your choice. You may also save all available Log files by using the Save All button. JustConnect config can also be saved here.

   If you are encountering a problem or a ToolsOnAir support member asks you for the Logs please use the Save All button to save the Logs and attach them to a support ticket.

5. Restart buttons: Here you can restart the engine, just:connect or both. Only use those functions if it is absolutely required.
6. Reset & Restore: You can reset the just:connect config here or you can restore an old config file.

Log List

Refresh the log files and then choose one of the available logs.

Save Log files

Save a selected log or save all logs to a zip file, which can be stored locally. It is also possible to save the just:connect config to the local disk here.

Restart

You can either restart the engine or just:connect separately or you can restart both application together. Please only use this is absolutely necessary.

Reset & Restore

You can reset the just:connect config here or you can restore just:connect from a backup file.