General
The number of channels depends on the linux server appliance (hardware). By default just:in linux v1.0 supports following two hardware configurations:
- 4xHD or 1x4k/UHD (up to p60)
- 8xHD or 2x4k/UHD (up to p60)
Please beware that it is not needed to change any just:in related setting on the server appliance, as every setting can be done via the user interface (just:connect).
Please beware that all linux appliance related settings like network configuration and storage settings should be done by a certified ToolsOnAir partner.
PCIe cards
just:in linux will be shipped as a server appliance and therefore comes with a video card already integrated. It is also possible to add other PCIe cards (second port available and free), like fibre channel cards to connect different storage systems to the linux appliance. (Please beware that the linux appliance will be shipped with two 10Gbit RJ45 ports per default)
Internal Raid
Each linux appliance will be shipped with an internal raid (raid10). This raid is available at "/media/internal_raid/ingest".
The internal raid is shared via smb by default (justin:justin)
Please consult a certified ToolsOnAir partner or a member of ToolsOnAir when enabling any post record file move processes in order to prevent problems.
Installation User Interface
The just:in user interface can be found on our support system or you can connect via smb (justin:justin) to the linux appliance and mount the share point tools ("/media/internal_raid/tools") and can copy the user interface from there.
Please beware that both, just:in mac and just:in linux are using the same user interface (just:in v3.0).