Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Supported Capturing Devices

We recommend to provide a continuously stable signal during your capture processes, otherwise the ingest process may be interrupted and the captured files may not be usable. In order to stabilize the signal in advance (= before it is sent to the Video card input) please use a Audio/Video Frame Synchronizer.



AJABlackmagic Design
PCIe Cards
  • KONA IP
  • KONA 4 (up to 4 SDI Signals)
  • KONA 3G (up to 4 SDI Signals)
  • KONA LHi
  • KONA LHe Plus
  • Corvid 3G, 22, 44, 44 BNC
  • Corvid 24 (up to 4 SDI Signals)
  • Corvid 88 (up to 8 SDI Signals)
  • DeckLink Mini Recorder / 4k
  • DeckLink SDI / DeckLink SDI 4K
  • DeckLink Studio / Studio 4K
  • DeckLink HD Extreme 3 / 3D
  • DeckLink 4K Extreme / 12G
  • DeckLink 4k Pro
  • DeckLink Quad, Quad 2
  • DeckLink Duo 2
Thunderbolt Devices
  • IoXT (up to 2 SDI Signals)
  • Io4K (up to 4 SDI Signals)
  • UltraStudio Mini Recorder
  • Ultrastudio 3D / Express
  • UltraStudio 4K Extreme 3
  • UltraStudio 4K Extreme
  • UltraStudio 4K
  • Intensity Extreme
Notes
  • Driver Version: 13 or later.
  • Looping the incoming Source: With the Io4K you may use the UFC Firmware Mode to make the engine loop the incoming source to any output for monitoring purposes.
  • Driver Version: 10.9.3 or later.
  • DeckLink Duo Hardware: We do not recommend DeckLink Duo cards for >2 Channel ingest due to thermic problems and reported frame loss issues. Please use the DeckLink Quad card or the DeckLink Duo 2 instead.


We support VTR Control via RS-422 or via a Moxa Ethernet to Serial Device up to macOS 10.12.x.

  • No labels

→ Use the sidebar to navigate.