General, Multiviewer
You can access the Just Control Preferences with the application menu Just Control - Preferences or by using the keyboard shortcut “Command-,”.
Authorise yourself by clicking the “Make Changes” button to adjust any Preferences.
In the “General, Multiviewer” Tab you can change Preferences related to the Channel Viewer, Inspector and Login behaviour.
Locking
Available options:
No locking
Lockable Inspector
Lockable Inspector And Multi-Viewer
Lockable Inspector
When activating this feature the Inspector is locked for unintended access, by enabling that setting only users with admin access (macOS system) can change settings within the Inspector. Only the naming section within the Inspector can be adjusted.
Click the Close button of the Inspector while pressing and holding the “Option-Key”. You will notice that the “Close” button turns into a Lock while pressing and holding the “Option-Key”. This indicates that the Inspector can be unlocked.
You need to enter the admin credentials to finally unlock the Inspector.
Lockable Inspector And Multi-Viewer
When enabling this feature the Inspector and the multi viewer area are locked for unintended access, by activating that setting only users with admin access (macOS system) can change settings within the user interface. Only the naming section within the Inspector can be adjusted.
That feature can be enabled/disabled the same way as the “Lockable Inspector” setting from above.
Automatically Log In Last User
This setting enables the possibility to avoid logging in, when starting Just Control. Please note, that this is only possible for Users, which do not have any password set.
Mouse Behaviour
You can define which overlays will be shown when entering or exiting a Channel View.
Mouse Enter Action: select whether the particular element will be shown or hidden when the mouse is hovering over a Channel View.
Mouse Exit Action: select whether the particular element will be shown or hidden when the mouse is not hovering over a Channel View.
Fullscreen Action: select whether the particular element will be shown or hidden when the Channel is in Fullscreen Mode.
Users
In the “Users” tab can you check and adjust all available Users and Templates.
On the left you can see all existing Users and by selecting one of those, you can see the belonging Templates (Multi viewer layouts).
Please beware that you can only delete Users and Templates, which are currently not in use.
If you want to change the password of a User, select the User and press the “Change Password“button.
Enter a new Password and press the “Set” button. If you want to remove the current Password, leave the field empty and use the “Set” button.
just:in
Within the just:in tab you can currently set one option.
Confirm stop recording
This is a safety feature to avoid unindented recording stops. When enabled, a Recording can only be stopped by pressing the “Record” button a second time. This feature concerns all recording modes (Crash and Schedule).
When pressing the “Record” button once, a check mark appears. Press it again to stop the recording process. Otherwise the recording will continue.
Stopping ongoing Recordings with the “Group Stop Recording” button at the bottom of the Inspector are affected by this setting as well.
Appearance (macOS)
Just Control uses the macOS system wide Appearance and Accent colour, which is set in the General preference pane within the System Preferences.
