Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

General

The Blackmagic ATEM Event Device can be used for changing the PGM Output of a Blackmagic Design ATEM Live Production Switcher.

Devices

Select the Device from the “Device & protocol” list, enter the IP address of the Blackmagic Design ATEM and press the “Add…” button to create the Device. Further configuration will be done within the Recording Event itself. Please see below.

Presets

Set a name for the Preset, select “Blackmagic ATEM” and press “Add”.

Now define which Input should be routed to the PGM Out. In addition you can set the mixer level and if required the “auto-transition” option. Once everything is set up, press the “Finish” button and the Event will be visible within the Presets list and therefore it will be available within the Inspector of Just Control as well.

  • No labels