Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

  1. Due to a driver issue it is currently not possible to use the “Buffered Input” setting with video devices from Blackmagic Design on an Apple silicon based Mac. We are working with Blackmagic Design to fix the issue. INTEL based Mac’s as well as video devices from AJA (on INTEL or Apple silicon) are not affected.

  2. When using a video device from Blackmagic Design under macOS Catalina (10.15.x) on Intel-based Macs, you MUST run Just Out and Just Control on separate machines, otherwise audio dropouts will occur while generating the Poster Frames or while working on the Finder level.

  3. Using an Apple silicon based Mac for the machine running Just Out, the AJA driver version 16.2 or higher is recommended.

  4. The HDMI output of the Mac can NOT be used for the broadcast output signal. Please ensure that one of the dedicated video devices listed below is used.

This chapter contains a list of supported video devices for playout in SD, HD or UHD. When using a Thunderbolt device from AJA, Blackmagic Design or PCI card (in a Sonnet enclosure), please make sure that the speed of the Thunderbolt bus is at least 20 Gbit/s (i.e. Thunderbolt 2). This is especially important when playing out in UHD. Connections using 40 Gbit/s (i.e. Thunderbolt 3) are preferred.

SD | HD
AJA

SD | HD
Blackmagic Design

SD | HD | UHD
AJA and BMD

  • Io XT 1

  • KONA 3G 1

  • KONA LHi

  • KONA LHe Plus (F&K)

  • KONA 1

  • AJA Io X3


  • Ultra Studio 3D 1

  • Ultra Studio mini monitor 1

  • Ultra Studio Express 1

  • Ultra Studio 4K 1

  • Ultra Studio HD Mini

  • DeckLink mini monitor (4K)

  • AJA Io 4K 1

  • AJA Io 4K Plus

  • AJA KONA 4

  • AJA KONA 5

  • AJA T-TAP Pro

  • UltraStudio 4K (30fps max) 1

  • UltraStudio 4K mini

  • Ultra Studio 4K Extreme 3

  • DeckLink SDI (4K)

  • DeckLink Studio (4K)

  • DeckLink (4K) Extreme (12G)

  • DeckLink 8K Pro

1 Legacy. This device has been working with previous versions of Just Out but is not available for purchase from AJA/Blackmagic Design any more. Please check if there are drivers available for your device supporting macOS 10.15.x (Catalina) or higher from AJA/Blackmagic Design, which will make the hardware compatible with our software. At the moment we recommend AJA driver version 16.0.2 or higher, or BMD driver version 12.1 or higher.

  • Listed here are those UHD/4K devices which we have tested with UHD playout up to and including p30. However it is possible that other devices which also support UHD/4K will work as well.

  • For playout of higher frame rates in UHD (up to p60), a MacPro7,1 or a an Apple silicon based Mac is required

  • No labels