Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Advanced Output Format Settings

  • Disabled, no Live Input: Disables the ability to switch to a Live Signal using the Video output device.

  • With DSK: Enables the ability to switch to a Live Signal (refer to chapter Live Signal Handling). Once a switch to live setting has been selected it is possible to define the default output to be Black or the Live Source. The With DSK-based setting must be selected in case Fill & Key should be sent to a production mixer (refer to chapter DSK-Based Switch to Live Configuration).

  • Without DSK: Enables the ability to switch to a Live Signal (refer to chapter Live Signal Handling and chapter Non DSK-Based Switch to Live Configuration).

  • To enable the hardware to pass through CC data from the Live Source of an HD Channel, activate the 4K Firmware of the AJA Kona 4 card, select a Non DSK mode in just:connect and connect the Live Signal to SDI 2 (AJA) or SDI 1 (Blackmagic).

  • CC data is only supported while using a Non DSK or Disabled Live SDI input configuration in the channel settings of just:connect. Selecting a DSK-basedmethod will disable the Playout of Closed Captions completely.

  • The output of Closed Captions of an UHD/4K channel is not supported at the moment.

  • Anti-aliased rendering: Anti-aliasing tries to counteract the jagged appearance of polygon edges. Enabling this function can have a considerable impact on the rendering performance of old or low-end GPUs. If you wish to use anti-aliasing, evaluate thoroughly if your system configuration is able to provide the required rendering capabilities.

  • SMPTE Color Correction: This settings allows you to handle the difference between the full color space (0–255) and the SMPTE color space (16–235).

    • None: If your Videos and your Graphic files are using the SMPTE color space. This setting is also the default setting for SD Channels.

    • Cropped: If the Videos are using the SMPTE color space and the Graphic files do not.

    • Scaled: If your Videos and your Graphics files are both not using the SMPTE color space. This setting is also the default setting for HD Channels.

  • Graphic engines: Selects the rendering engine. For additional information refer to chapter Graphic Elements.

    • QTZ, Composition Builder only: Select this if you only want to play out QTZ and/or composition:builder Graphics (as well as simple image files).

    • TOA Graphics, QTZ, Composition Builder: Select this to enable TOA Graphics Engine files (file ending "jscomposition") and Videos with audio to be played on an FX Layer. Note that this renderer disables the scaling functionality of the QTZ rendering engine which has a direct impact on the quality whenever the image is changed in its pixel dimensions (scaling and aspect ratio change). Therefore make sure to activate this feature only in case you do not need the scaling function but you do need the ability to play Videos with audio in one of the FX Layers.

  • Low Latency Playout (just:live only): Enable this option for the lowest latency between pressing the Play button and the actual playout of a Video. Deactivate this option when using MXF files or Videos which are taking some time to decompress like XDCam or H.264.

  • Interlaced Aware Scaling: When activated, any Video which has to be scaled (SD ↔ HD, aspect ratio conversion) will have additional interlaced-aware filtering applied to it in order to preserve the interlace fields and to improve the quality of the scaled Video.

  • Proxy preview size: Here you can define the pixel size of the proxy image which is generated inside the just:out engine defined for this Channel. This proxy image is shown in just:connects Summary & Performance tab as well as the On Air window of just:live and just:play.

  1. Aspect Ratio Options:

Define how differences of the aspect ratio should be handled. This preset can be overwritten for each Video in the Inspector of just:live/just:play. You can also change the aspect ratio of Videos which match the engine's aspect ratio but have been saved in the wrong aspect ratio. Refer to chapter Aspect Ratio Control.

Proxy Preview Pixel Size

Reduce the Pixel Size

Increase the Pixel Size

  • In case the playout format is SD.

  • The Channel is used for just:play.

  • The CPU load is higher than 60%.

  • The available network bandwidth is very limited.

  • The On Air preview is not important as there is a dedicated monitor available.

  • In case the playout format is HD.

  • The Channel is used for just:live.

  • There is enough CPU power available to handle the higher data rate.

  • There is enough network bandwidth available.

  • In case only the On Air preview is available to check the final output.

In addition to the pixel size the frame rate and the compression can be adjusted. This cannot be done for each Channel individually, but for all Channels which are administrated by the same just:connect. Refer to chapter 13.9 Checking The Status Of A Channel.

Increasing the proxy preview size can harm the final output. So check the output signal as well as the dropped frame counter in just:connect every time you change the pixel size of the proxy preview.


  • No labels

→ Use the sidebar to navigate.