Important: Before you Install

just:in comes as a disk image (DMG). To open the disk image the Security settings of the system must be changed.

Open the System Preferences.
Go to Security & Privacy.
Click on the General tab.
Unlock the Preference Pane.
Change the setting to Allow apps downloaded from App Store and identified developers.
You can now head to the point Download & Installation below.

Further reading (external link): → macOS Mojave: Open an app from an unidentified developer

Download and Installation

Download just:in from our Online Helpdesk (free account required) or copy it from the internal raid of just:in linux (/media/internal_raid/tools).
Extract the downloaded ZIP archive.
The just:in disk image will show up.
Copy Just In to the Applications folder.

Do not copy Just In Engine, as this is the Mac version of the Engine, which is not required when using the just:in Linux Engine.
If desired, add the just:in Application to your Dock.

2. User Interface and Devices/Channels

Go to the Applications folder and open the just:in Application.
The just:in main window appears.
Select a grid layout for the channel viewer. This can be reverted at any time later.
Then the actual just:in user interface opens with the selected grid layout.
Open the Inspector on the right side and switch to the Connections-Tab. There press the Add Connection-Button to open the Configuration Window.
Unlock the Panel by clicking on the cock symbol on the bottom left side.
Authorise yourself to unlock the Configuration Panel.
Press on the Plus-Button at the bottom of the Devices & Channels list.
Add the IP-Address of your just:in linux server and press the Add-Button to establish a connection to the server (Port is by default 5000).
The the Configuration Wizard appears, which is helping with the basic configuration steps.
Change settings accordingly here. Please check with your reseller or directly with us, which video hardware is installed and select your preferred SDI format. Then select at least one preconfigured Capture Preset and finish the configuration by pressing the Configure button.
Then you can see the engine/device settings and the channel settings.
There is no need no change anything here. You can now switch back to the just:in interface and the configuration panel can be closed. Drag&Drop the channels from the Connections-Tab to the viewer area and the channels will be connected to the user interface.
Once the channels are connected you can check the appropriate settings.
Then a recording can be started for one or all channels.