Table of Contents
Preface
The Inspector is used to select your Capture Settings (such as Naming Conventions, Metadata Sets, Capture- and Destination Presets…). This chapter explains all Inspector options and also shows how the Inspector changes depending on the currently selected Capture Mode.
Before you are able to use the Inspector it is mandatory that one of the Channel Views in the just:in User Interface is connected to a Channel which is configured and running in just:in Engine. Refer to the chapter just:in v3.5 Administrator Manual if you have not yet configured the Channel(s) yet.
General Inspector Overview & Crash Capture Inspector
For detailed information on how to start a Recording please refer to the chapter Capture Modes.
The Inspector changes depending on the Capture Mode you are using. This shows the Inspector when in Crash Capture Mode.
- Channel Name or Connection Info (click to toggle).
- Clip:
- Naming Convention: select one of the Presets which have been configured in just:in Engine.
- Variables: visible in this figure as Name or Angel, this list may differ – depending on your Naming Presets.
- Resulting Filename: shows the resulting Filename based on the elements of the selected Naming Preset. The file name used for the recorded Video can be different if the filename already exists.
- Timecode:
- Timecode: select a Timecode source, like Computer Time, VTR, LTC…
- Offset: define a Timecode offset.
- Stop on Timecode: define a Timecode where to stop the Recording.
- Metadata:
- Metadata Set: you can select a Metadata set, for example QuickTime. This provides several predefined Metadata fields for you to fill.
- Writes at: select whether the Metadata will be written at the Start or at the End of a capture.
- Audio Monitor: you can listen to the Audio stream of the incoming Signal to preview the Audio part in addition to the Video preview. This is for previewing only and will not replace a hardware device to check the audio quality or AV synchronisation. (Please update to macOS 10.13.3 to enable this function on a new Mac Pro)
- Enabling/Disabling a Single Audio Channel: click on the desired Audio Channel to enable/disable the Audio Preview.
- Enabling/Disabling all Audio Channels: hold the option key while clicking on any Audio Channel to enable/disable the Audio Preview for all Channels.
- Errors: If there are any errors, they will be displayed here and can then be removed error by error or all at once.
- Captures: add or remove Capture-IDs by using the add and delete buttons.
- Capture Preset: select one of the Presets which have been configured in just:in Engine.
- Destination Preset: select one of the Presets which have been configured in just:in Engine.
- Reference Movie (depending on Destination Preset): select the type of Reference Movie.
A channel can have multiple Capture-IDs and can therefore record in multiple format. Please beware that this can be very CPU-intensive and appropriate testing is recommended before using that in productions.
Batch Recording Inspector
For detailed information on how to start a Recording please refer to the chapter Capture Modes.
The Inspector changes depending on the Recording Mode you are using. This shows the Inspector when in Batch Recording Mode.
- Inpoint: the Capture Inpoint.
- Outpoint: the Capture Outpoint.
- Duration: the Capture Duration.
- Rewind on completion: enable this to rewind on completion.
- Log button: logs the previously defined Capture.
- Reset button: resets the current Capture.
- Clear table button: clears the Batch Log table.
- Batch Log Table: lists Batch Recordings which have been added with the Log button.
Scheduled Recording Inspector
For detailed information on how to make a Recording please refer to the chapter Capture Modes (just:in v3.5).
The Inspector changes depending on the Recording Mode you are using. This shows the Inspector when in Scheduled Recording Mode. At the top of the Inspector all Apple Calendar Events for that particular Channel are listed.
You can use any Calendar, which can be imported to Apple Calendar for just:in. This can be a local Calendar, like that one, which was created be the just:in channel, or an iCloud or gmail Calendar. If you need more information, do not hesitate to contact us.
In Schedule Mode there is no record button available and recording will start and stop automatically according to the start- and end-time of the Calendar events.