Table of Contents
Table of Contents |
---|
Overview
On the just:in Engine Linux server appliance you can find:
- The basic Linux installation (CentOS 7.x)
- Video card driver (AJA or BlackmagicDesign)
- just:in Engine (TOA Media Engine = tme)
- just:connect (TOA just:connect = tjc)
just:in Engine Linux and just:connect start automatically when the Linux system has been booted. If they are configured properly they can immediately communicate with a just:in User Interface.
User and Password
The system can be accessed with following credentials via ssh.
Code Block |
---|
User: justin Password: justin |
Network Settings
By default both network ports are set to DHCP (also the IPMI port is set to DHCP).
Blackmagic Firmware Updater
Warning |
---|
Only update the Blackmagic driver if you have issues with the system. |
...
Code Block |
---|
BlackmagicFirmwareUpdater update [device] |
just:connect Configuration File & Logs
just:connect stores all Channel related information (settings, presets…) in this file:
...
Info |
---|
Please beware that you can also save and restore this JustConnect.txt file. |
Logs
just:connect saves log files. There is log file for each just:connect start and for each Channel. It can be found here:
...
Code Block | ||
---|---|---|
| ||
/var/log/tme |
Restarting just:in Engine Linux and just:connect
These commands restart just:in Engine Linux and just:connect. They must be executed as root ('sudo').
just:in Engine Linux | sudo systemctl restart tme |
---|---|
just:connect | sudo systemctl restart tjc |
just:in Engine Linux & just:connect | sudo tme restart (this command will delete all existing log files from both, tme and tjc) |
Software Updates
Please contact your TOA reseller or TOA directly if you want to update your just:in linux appliance.