On the just:in Engine Linux server appliance you can find:
just:in Engine Linux and just:connect start automatically when the Linux system has been booted. If they are configured properly they can immediately communicate with a just:in User Interface.
The system can be accessed with following credentials via ssh.
User: justin Password: justin |
By default both network ports are set to DHCP (also the IPMI port is set to DHCP).
Only update the Blackmagic driver if you have issues with the system. |
In some situations the Blackmagic video card needs a Firmware update. Verify if the card is working properly with the installed driver version by using the following command:
BlackmagicFirmwareUpdater status |
No Firmware update is required if all inputs display the status ok. If the status is not ok use following command to update the firmware. Restart the system afterwards.
BlackmagicFirmwareUpdater update [device] |
just:connect stores all Channel related information (settings, presets…) in this file:
/var/justconnect/JustConnect.txt |
Delete this file if there is a major problem with the system. After deleting this config file just:connect must be restarted.
Please beware that you can also save and restore this JustConnect.txt file. |
just:connect saves log files. There is log file for each just:connect start and for each Channel. It can be found here:
/var/log/justconnect |
The just:in linux engine also saves logs. These can be found here:
/var/log/tme |
These commands restart just:in Engine Linux and just:connect. They must be executed as root ('sudo').
just:in Engine Linux | sudo systemctl restart tme |
---|---|
just:connect | sudo systemctl restart tjc |
just:in Engine Linux & just:connect | sudo tme restart (this command will delete all existing log files from both, tme and tjc) |
Please contact your TOA reseller or TOA directly if you want to update your just:in linux appliance.