...

1. Unlock just:connect for the desired channel and activate the Expert User mode by clicking the respective tab in the upper middle of the just:connect application window.
2. Activate on the Workflows tab.
3. Click on the Standard Workflow button.
4. Under Workflow Communication, activate the Enable on port checkbox.
5. Enter a port which is currently not used on this machine and make sure that the same port is not used for another channel on this machine.
   

Managing Channels in just:next

Adding a Channel

1. Click on the Add Channel button in the upper right of the just:next application window.
2. Enter a Channel Name. You can use any name but it makes sense to use the same name like defined in just:connect.
3. IP: Enter the IP-Address of the machine running just:connect which hosts the channel you would like to control.
4. Enter the Workflow Communication Port you have previously defined in just:connect.
   Do not use the port of the channel which is shown in the channel view of just:connect.
5. Click the Add Channel button.
   

Editing a Channel

1. Select a channel in the channels list of just:next.
2. Click on the Edit Channel button.
3. Edit the settings accordingly to your needs. 
4. Click the Edit Channel button to apply your changes.
   

Removing a Channel

1. Select a channel in the channels list of just:next.
2. Click on the Remove Channel(s) button.
3. You will be asked if you really want to remove the selected channel(s).