Please consider these points while configuring a Playout of SCTE104 SCTE-104 triggers.
We support devices from AJA and BMD for SCTE104 SCTE-104 insert into the VANC data area of the SDI signal.
AJA supports only a single output to carry VANC data. Which output this is depends on the video device and the switch to live method used for the channel.
The output of VANC data is currently not supported for channels set up to play out fill and key using a device from BMD.
To be able to pass through VANC data embedded into the Live Signal, an AJA Io 4K Plus, Io X3, KONA 4 or KONA 5 is needed or a "4K" device from BMD.
We support different SCTE104 SCTE-104 messages. Please contact the vendor of the splicer/inserter for more information about the method supported by their hardware.
Check the just:out logs to verify that the SCTE104 SCTE-104 trigger has been generated by just:out.
Using an AJA device, you can use the ntv2watcher app to verify, that the AJA device processed the SCTE104 SCTE-104 trigger coming from just:out.
just:in v5.5 and higher can be used to verify, that the SDI signal includes the SCTE104 SCTE-104 trigger. Please check the just:in manual for more information.
| Note |
|---|
We have been testing SCTE104 SCTE-104 support ONLY using PAL 1920x1080 HD channels, but expect other formats to work as well. |
| Info |
|---|
Playout of SCTE104 SCTE-104 VANC data requires the optional Event Layer license. |
...