[JIM] Activation v.5.5
just:in mac is always fully featured but is not activated by default, and therefore a ToolOnAir watermark will be added to all Recordings. As soon as you purchase a just:in mac license, you will receive an activation code to remove the watermark.
Please note that an activation is not required to test the just:in mac solution (Just In Engine and Just Control).
Activating a Device
Open the Just Control Configuration panel, select a Device, and switch to the “Activation” tab.
To apply any changes, make sure to unlock the Just Control Configuration panel first.
Copy and Paste the Activation Key you have received from ToolsOnAir into the “Activation Code” field and either press the “Enter” key or the "Activate" button. Upon successful activation, the status in the “Current activation status and activated option” list changes from “Yellow” to “Green”.
Please verify that the Just In Engine application gets restarted after entering the Activation Key.
Switch Activation between Channels
If you are working with frequently changing setups, like for instance using four licensed SDI channels (e.g. with an AJA KONA 4), and you need to change that configuration to use three of these SDI channels with one (1) additional NDI®5 channel, then please confirm that you only enable the number of licensed channels in use (in our case 4 channels) and not all of them, as you might exceed the number of totally licensed channels on that particular machine.
Transferring a licence
If you want to transfer a licence from one to another machine, please contact us via our Support Helpdesk and we will guide you through that process. A licence transfer from one machine to another can be easily done if an active Support and Software Maintenance contract is in place.