[JIML] Diagnostics Window ("Just In Mac Lite Status") v.6.0

The Diagnostics Window shows the Status of the Channels and the Just In Mac Lite application.

  • Device Port: Current port for communication between the engine and the user interface. The Default Port is 5000.

  • Memory: displays the amount of the currently used RAM. The color of the usage bar changes accordingly to the amount of RAM used. If it constantly stays red, please review the system requirements and add more RAM to the machine.

  • Channel: Name of the Channel, as defined in the Configuration Panel.

  • Owner: shows the name of the Just Control, client which is currently connected to the particular Channel. If there is no connection, it states Channel Available.

  • Port: Port of the Channel, as defined in the Channels Settings.

  • Video Mode: Video Mode of the Channel.

  • Frames in Buffer: displays how many frames are currently buffered. Values below 50 are normally good, if the value stays above 100 constantly, please review the system requirements and check your configuration.

  • Status: displays whether the Channel is currently in Idle or Recording Mode.

  • Show channel log: press the Show Channel Log button to display the log of the corresponding Channel in the Console application of the operating system.

Diagnostics Always On Top

When the Status Window should be visible all the time, go to the Window Menu and select “Diagnostics Always On Top” option.

 

→ Use the sidebar to navigate.