[JIM] Blackmagic ATEM (Ethernet) v.5.5

Owned by Christian Schabasser
Last updated: Jul 20, 2023 by Manuel Grund
2 min read

General

The Blackmagic ATEM Event Device can be used to change the PGM Output of a Blackmagic Design ATEM Live Production Switcher.

Devices

Select the Device from the “Device & protocol” list, enter the IP address of the Blackmagic Design ATEM production switcher, and press the “Add…” button to create the Device. Further configuration will be done within the Recording Event itself. Please see below:

Presets

Set a name for the Preset, select “Blackmagic ATEM” and press “Add”.

Now define which Input should be routed to the PGM Out. In addition, you can set the mixer level and, if required, the “auto-transition” option. Once everything is set up, press the “Finish” button and the Event will be visible within the Presets list, and be available within the Inspector of Just Control as well.

→ Use the sidebar to navigate.