12.8 Channel - Events Tab (v.4.x)
You must unlock the Just Control Configuration window and stop the channel(s) to be able to make any changes.
Devices
This tab allows you to configure hardware based 3rd party devices, which can be controlled using the Event Layer of the just:live and just:play user interface.
Event device and configuration area: Select the device protocol and the method (serial, network or VANC) you would like to use with the device.
Currently active event devices: Lists all currently active Event Devices.
Add Button: Adds the configured Event Device to the list of Event Devices on the right.
Save/Load Preset: Each device has its own ID which is used to identify the device in the playlist XML. To transfer the device ID to another system or to save it as a backup, the device can be saved and loaded here.
Available Event Devices & Protocols
Click the “Device & protocol” dropdown menu to see all devices which are available with this version
Removing an Event Device
Make sure you have selected the proper Channel in the Channel List.
Go to the Events tab.
Select the Event Device in the Currently active event devices list on the right.
Press the backspace key.
Accept the warning dialog to remove the Event Device. This cannot be undone.
Presets:
Once one or several event devices have been defined, presets which are based on the existing devices can be generated.
Click “Add Preset” to open the Preset editor.