Work with live:cut Projects (5.1)
All of the following chapters assume that you are running a properly configured just:in setup. If this is not the case, please refer to the particular just:in documentation.
live:cut Projects
Create a live:cut Project
Open just:control and select the desired Channels for your live:cut Project and open the Inspector. You need to select at least two Channels. Select a Timecode Source and a Capture- and Destination-Preset. It is mandatory that these attributes are synchronized for all Channels used with live:cut.
Go to the menu Channel → New live:cut Project. Enter a Name, Scene and Take value for the live:cut Project. A Project Template is not required at this time. Press the Create button when you are done.
If everything went okay the live:cut Interface will be shown and you can start working with your live:cut Project.
Close a live:cut Project
Go to the menu File → Close Project. The live:cut Project will be closed and the just:control interface will be displayed again.
Open an existing live:cut Project
Open the folder ~/Documents/LiveCut Documents/Projects and double click the Project file (*.lcproj) you want to open.
live:cut opens the Project and displays an already filled EDL. You may export the Project again by using the menu Project → Export to …
live:cut Project Templates
Create a live:cut Project Template
Make sure your are in a live:cut Project. To open a previously saved live:cut Project refer to the instructions above. Go to the menu Project → Create Template.
Enter a Template name and press the Save button. Such Project Templates can be used with every live:cut Project start.
Use a live:cut Project Template
Open just:control, select the Channels, you want to use for your live:cut Project and and start a new live:cut Project (Go to the menu File → New live:cut Project).
Select your Project Template from the drop-down menu and use the Create button to start the live:cut Project.
Remove a live:cut Project Template
Make sure that just:control is currently not running. In the Finder Window go to your User folder. Open the folder ~/Documents/LiveCut Documents/Project Templates and Delete the desired Project Template.
Start a Multicam Recording
Before starting a Multicam Recording you have to ensure that your live:cut Project Settings are configured properly. Refer to the chapter Project Settings.
If you have already configured the Project Settings you can head straight to the chapter Start a Multicam Recording.