Configure the Linux Hardware

All Linux related settings like network configuration and storage settings should be handled by a certified ToolsOnAir partner. After that, it is normally not required to change any just:in related settings on the appliance, as every setting can be done via just:control.

Number of available SDI channels

The number of the available SDI Channels depend on the specific just:in linux appliance. There are currently following appliances available:

• JIL4-HDD or JIL4-SSD: 4xHD or 1xUHD (up to p60)

• JIL8-HDD or JIL8-SSD: 8xHD or 2xUHD (up to p60)

• JIL4-12G: up to 4xUHD

• JIL8-12G: up to 8xUHD

NDI and SRT Inputs

Additionally to the available SDI (or HDMI) inputs, it is possible to add NDI or SRT input channels. This can be done within the just:control configuration panel. Depending on the given license key, additional NDI and/or SRT channels can be used alongside physical inputs like SDI or HMDI.

Additional PCIe Cards

Depending on the just:in linux appliance, there are one or multiple PCIe slots available to add fibre channel or additional ethernet cards to connect specific storage systems to the just:in linux appliance.

Internal RAID

Every just:in linux appliance includes an internal RAID. The RAID level and the size of the internal RAID depend on the appliance itself and the given settings. Basically the internal RAID can be used as main recording location or as fallback path.

JIL4/8-HDD

These just:in linux appliances have an internal software RAID (RAID0 or RAID10) configured. The RAID is mounted at:

and shared via SMB at startup by default. The default user is "justin" and the default password is "justin" as well.

JIL4/8-SSD

These just:in linux appliances have an internal RAID configured, which is handled by a dedicated RAID controller. The RAID is mounted at:

and shared via SMB at startup by default. The default user is "justin" and the default password is "justin" as well.

JIL4/8-12G

These just:in linux appliances have an internal RAID configured, which is handled by a dedicated RAID controller. The RAID is mounted at:

and shared via SMB at startup by default. The default user is "justin" and the default password is "justin" as well.

just:control installation

• just:control can be downloaded from the ToolsOnAir support system. Follow the regular installation procedure described in the appropriate User Manuals.

• Alternatively you can mount /media/internal_raid/tools at your macOS client and copy the just:control application from there.