The number of Channels you can use depends on the Linux server (= hardware). By default just:in Linux v1.0 supports these hardware configurations:
All Linux related settings like network configuration and storage settings should be done by a certified ToolsOnAir partner. After that, it is not required to change any just:in related settings on the Linux server, as every setting can be done via the just:connect User Interface.
just:in Linux is shipped as a server appliance and comes with a video card already integrated. It is also possible to add another PCIe card to the second slot, like a fibre channel card to connect different storage systems to the Linux appliance.
The system is shipped with two 10Gbit RJ45 ports per default. |
The system is shipped with an internal RAID (RAID 10). This RAID is available at /media/internal_raid/ingest and is shared via SMB by default (justin:justin).
Please consult a certified ToolsOnAir partner or a member of ToolsOnAir when enabling any post record file move processes in order to prevent problems. |
The just:in User Interface can be downloaded from our support system or you can connect via SMB (justin:justin) to the Linux system and mount the share point /media/internal_raid/tools. Afterwards you can copy the just:in User Interface from there.
just:in Mac and just:in Linux are using the same user interface, which is currently v3. |