All Linux related settings like network configuration and storage settings should be done by a certified ToolsOnAir partner. After that it is not required to change any just:in related settings on the Linux server, as every setting can be done via the just:connect User Interface. |
The number of Channels you can use depends on the Linux server (= hardware). By default just:in Linux v2.0 supports these hardware configurations:
just:in Linux is shipped as a server appliance and comes with a video card already integrated. It is also possible to add another PCIe card to the second slot, like a fibre channel card to connect different storage systems to the Linux appliance.
The system is shipped with two 10Gbit RJ45 ports by default. |
The system is shipped with an internal RAID (RAID0 or 10). This RAID is available at /media/internal_raid/ingest and is shared via SMB by default. The default user is "justin" and the default password is also "justin".
Please consult a certified ToolsOnAir partner or a member of ToolsOnAir when enabling any post record file move processes in order to prevent problems. |
just:in Mac and just:in Linux are using the same user interface, which is currently version 4.0. |