Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

The advantage of using the built-in method is, that it is possible to switch between a live signal and the playout of a movie without the need of a video router. In addition it is possible to add graphics to the live signal without the need of a second video device. Like described above, there are two methods to achieve this and here is how the DS Keyer based setup (AJA only) has to be done.

Connect a signal and select the input in the AJA control panel

Connect the live signal to any of the available video inputs and select that input in the AJA control panel "Input Select".

Activate the built-in downstream keyer of the AJA device 

Configure the AJA downstream keyer according to this screenshot to activate the pass-through mode:

  • Mode: "Frame Buffer over Video In"
  • Audio Out: "Frame Buffer"

Select the right switch to live method for your channel

Select a "With DSK" based setting in the advanced Output Format settings in just:connect


  • No labels

→ Use the sidebar to navigate.