Network TCP Port: This is the network TCP port used by just:out when publishing its service over the network to just:connect. By default this is set to "49152" and must correspond with the port defined in just:connect. It is possible to use any unused port between 1 and 65535, in case port 49152 is already used on this machine.
A port is an unique identifier for a service which runs on a computer. If you are not sure whether a port is used on your network, please consult your network administrator.
As-Run Log Folder: If desired, just:out can write a log le from the playout to a predefined location.
Timecode Source: Here you can define where just:out takes the master timecode from. It is possible to activate the resync function which will resync the just:out master timecode to match the reference timecode at the end of each playlist. Within just:live/just:play this function can be deactivated for single playlists in the inspector.
Broadcast (Output) Timecode: Using a MTC device and one of → Punchlights timecode displays you can show the current/elapsed or remaining time.
When changing the preferences you must restart just:out for any changes to take effect. Restarting just:out will stop the final output temporarily.