General
The Blackmagic ATEM Event Device can be used for following tasks:
which can be performed on a Blackmagic Design ATEM Live Production Switcher.
Devices
Select the Device from the “Device & protocol” list, enter the IP address of the Blackmagic Design ATEM production switcher, and press the “Add…” button to create the Device. Further configuration will be done within the Recording Event itself. Please see below:
Presets
Set a name for the Preset, select “Blackmagic ATEM” and press “Add”.
Now define which Input should be routed to the PGM Out. In addition, you can set the mixer level and, if required, the “auto-transition” option. Other options can be defined when using the selection box on the top right, such as:
Once everything is set up, press the “Finish” button and the Event will be visible within the Presets list, and be available within the Inspector of Just Control as well.
