The System tab is mainly used for maintenance tasks like checking and saving log files, or restarting the Engine or just:connect remotely or to save a backup file of the just:connect settings, which can be useful for restoring older configs at some point.

Table of Contents

Overview

1. Log files: select one of the available Log files here.
2. Refresh button: to update a displayed Log file you must press the Refresh button.
3. Log File Display: displays the content of the selected Log.

4. Save Log File: saves the selected Log file to a destination of your choice. You may also save all available Log files by using the Save All button. JustConnect config The Just In configuration can also be saved here.
   Image Added

   Info
   If you are encountering a problem or a ToolsOnAir support member asks you for the Logs please use the Save All button to save the Logs and attach them to a support ticket.

   
   

5. Restart buttons: Here you can restart the engine restarts the Engine, just:connect or both. Only use those functions if it is absolutely required.
   Image Added
   
   
6. Reset & Restore: You can reset the just:connect config here or you can restore an old config file.
   Image Added

Log List

Refresh the log files and then choose one of the available logs.

Save Log files

Save a selected log or save all logs to a zip file, which can be stored locally. It is also possible to save the just:connect config to the local disk here.

Image Removed

Restart

You can either restart the engine or just:connect separately or you can restart both application together. Please only use this is absolutely necessary.

Image Removed

Reset & Restore

You can reset the just:connect config here or you can restore just:connect from a backup file.

Image Removed