Please do the following to change or verify the port used by a channel:
| Assign a port- To assign a unique identifier to a channel you must type in a number in the port field which represents the port used by this channel. The port must be between 1 and 65535 and it must be unused on your network.
- By default we use port 49162 for the first channel administered by just:connect, 49163 for the second, 49164 for the third and so on.
- Make sure that the ports are not closed on any router/ firewall which might be installed between just:connect and the interface client(s).
Warning |
---|
- A port is an unique identifier for a service which runs on a computer. If you are not sure whether a port is used on your network, please consult your network administrator.
- Each channel must have a different port number assigned. Using the sameport number (for two channels or one just:out engine) on the same machine will result in an error.
|
|
Make sure that you use the same port in the log in window of the user interface and for the channel in just:connect, so that the user interface can connect to the channel.
| Check the port settings- Click on the sprocket of the user interface to flip it
- Check the port number of the channel defined here
- Make sure it is the same port of the channel you would like to connect to
Info |
---|
It is possible to define a different channel name here (which is then shown in the user interface when using just:play), but the port number must match with the port number defined in just:connect. |
|