...
RAID controllers and SAS drives have a maximum speed, so it can help to limit data throughput to clients. just:store’s Bandwidth Limitation feature can help allows you to manage this for each workstation or a complete subnet.
...
As not every workstation needs to take advantage of a 10 Gbit connection, we can set bandwidth limitations accordingly, as shown in the example scenario below.
...
Accessing the Bandwidth Limitation
...
To see the Bandwidth Limitations press the tab BANDWIDTH LIMITATION as you can see above.
...
Click on Network in the sidebar.
Click on the Bandwidth Limitation tab at the top.
Device: shows the device for the limitation rule.
Incoming/Outgoing Rules: displays the destination and rate of the limitation rule.
Adding a Limitation Rule
Press In the Incoming Rules column, press the plus button on the device you want to add a new limitation ruleto.
Choose wheter whether this is an incoming, outgoing or both-directions rule. The bandwidth limitation options Bandwidth Limitation Rule Options are explained below.
Press the Add Bandwidth Limitation button when you’re done.
The rule should now be reflected in the overview.
...
Press the Edit button
Edit the bandwidth limit to your needs. The bandwidth limitation options Bandwidth Limitation Rule Options are explained above.
Press the Change Bandwidth Limitation button when you’re done.
The changes should now be reflected in the overview.
...
Hover above the name of the interface of which you want to delete all limitations. On mobile devices, single tap on the name of the desired interface.
Press the X button on the very left.
Confirm the dialog if you are sure. The deletion cannot be undone.
The changes should now be reflected in the overview.
| Note |
|---|
Please keep in mind changing the limitations Changing a limitation can change network speed at the time you apply your changes. |